Our guy has been putting up 12 strand armored 250 foor preterm that he had
left over. Using residential enclosures and resplicing to length at the
botton. gives us 4 APs and tow backhauls potential

On Thu, Dec 27, 2018 at 10:55 AM Carl Peterson <cpeter...@portnetworks.com>
wrote:

> We've just started using Clearfield pre-made pushable or strong fiber
> spools pulled through 10/6 duct up to the radio.  We use BiDi so just one
> strand but if you wanted a feed to a tower top they could make you MPO
> cables that you could route to a YourX terminal up top through 14/10.
>
> I wish someone made a 10/6 duct with copper conductors on the outside of
> it.  Like Clearfield
> s toneable 10/6 except with two larger conductors under the outer wrap
> instead of the single small tone wire.  Would be perfect for Siklu instals
> as you could run the duct right into their long connector and split off the
> conductors to power the radio.
>
> On Thu, Dec 27, 2018 at 9:21 AM dave <dmilho...@wletc.com> wrote:
>
>> We use Bestronics custom hybrid cable pre-terminated armor direct bury
>> type. Has 1 pair 12awg stranded and 2 pair SM or MM strands. Been doing it
>> for a while with no issues.
>>
>> Just did 250 full medusa install with DDB cabinet topside for all
>> terminations to go.
>>
>>
>> On 12/20/18 2:02 PM, SmarterBroadband wrote:
>>
>> What are people using for Fiber up the tower?
>>
>>
>>
>> We are looking for Single mode 4 strand – 2 LC Duplex at each end.  140
>> foot lengths.   They will be run up inside a monopole.
>>
>>
>>
>> Are you using armored?  Outdoor?  What?
>>
>>
>>
>> Where are people getting theirs made?
>>
>>
>>
>> Thanks
>>
>>
>>
>> Adam
>>
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>
>
> --
>
> Carl Peterson
>
> *PORT NETWORKS*
>
> 401 E Pratt St, Ste 2553
>
> Baltimore, MD 21202
>
> (410) 637-3707
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to