All integrated SMs, all with KP Reflectors. On Tue, Sep 23, 2014 at 9:20 AM, Glen Waldrop via Af <af@afmug.com> wrote:
> A & B hooked to the same polarity on each client? > > > > ----- Original Message ----- > *From:* Kade Sullivan via Af <af@afmug.com> > *To:* af@afmug.com > *Sent:* Tuesday, September 23, 2014 9:10 AM > *Subject:* [AFMUG] PMP450 3.65 Oddities > > So I have our second 450 3.65 AP up, and every single AP at this site is > showing a ~10dbi gap between the 2 polarities on the Uplink side of things > (from the SM's perspective). > > The strangest part is that the 10db gap seems to go back and forth between > the A side being the stronger signal and the B side. It seems random, and > I have included a shot of each of the link status pages on this AP. All > these SMs are in the same general geographic area, within 10 degrees of > each in relation to the AP. > > You can see the top SM here actually has the A side with a better signal, > while the other 4 show a B side with the higher signal. What in the crap > is going on here. Do we have a bad antenna on the AP? > > I can't seem to make any sense of this at all. All these SMs have the > same KP reflector, and they have all been visited twice to ensure they are > peaked. > > I'm at a loss here. > > Help me AFMUG! > >