Our Top boxes usually contain the following.

1x Sitemonitor
2x GigabitSyncInjectors
1x Citel DS210-48DC
2x Traco TCL 060-124 DC Down Convertors -
http://www.tracopower.com/products/tcl-dc.pdf
1x RB2011
2x APC PRM4 Surge Chasis
8x GigEAPC-HV



Gerard

On Sun, Sep 28, 2014 at 10:57 AM, Chuck Hogg via Af <af@afmug.com> wrote:

> We use this, and solder two legs together.  We send 48v DC up to the top
> and downconvert.  I think we've gone about 450' with this configuration
> (including up the tower and along the cable raceway to the inside of a
> building)  However, that's primarily why we send 48v up and downconvert,
> because of the voltage loss.  Gives very clean 24v power to the equipment.
>
> http://www.amazon.com/Cable-Portable-Power-Gauge-Conductor/dp/B0076ZT4C2
>
> It would probably be better for me to take a picture of one of our boxes.
> We are continually building them as we continue our wireless upgrades.
>
> I don't remember if Gerard resub'd to this list after it moved, but he's
> the engineer behind the box.  He can give you parts.
>
> Regards,
> Chuck
>
> On Sun, Sep 28, 2014 at 10:07 AM, Tyson Burris @ Internet Comm. Inc via Af
> <af@afmug.com> wrote:
>
>> Chuck,
>>
>> Are you doing any 8-10 gauge runs exceeding 500' ?
>>
>> I can't seem to find what I need
>>
>> Sent from my iPhone
>>
>> On Sep 28, 2014, at 9:50 AM, Chuck Hogg via Af <af@afmug.com> wrote:
>>
>> We do power and fiber up the tower as our standard...ever since that
>> standard has been used, I don't think we've lost a site yet.
>>
>> Regards,
>> Chuck
>>
>> On Sat, Sep 27, 2014 at 4:32 PM, Matt via Af <af@afmug.com> wrote:
>>
>>> This is what we have used for all our CMM units for years.
>>>
>>> http://www.outdoorspeakerdepot.com/14ga2inspca5.html
>>>
>>> Outdoor, UV resistant, etc.
>>>
>>>
>>>
>>> On Sat, Sep 27, 2014 at 1:16 PM, Gino Villarini via Af <af@afmug.com>
>>> wrote:
>>> > Planning on hanging a DC box on the tower
>>> >
>>> > 30-40w total power
>>> >
>>> > Cat5 using multiple pairs or 2 conductor cable?
>>> >
>>> > We are inclined on cat 5 for standardization purposes...
>>> >
>>> > Sent from Marconi's and Graham Bell's fused thoughts!!!
>>> >
>>>
>>
>>
>

Reply via email to