dban?
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman Sent: Tuesday, April 21, 2015 8:43 AM To: af@afmug.com Subject: Re: [AFMUG] ePMP Red Triangle ! 2.4 is awful trash. Throw it away. Delete it and dban that sector. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 21, 2015 at 11:41 AM, SmarterBroadband <li...@smarterbroadband.com> wrote: 2.4 will look at 2.4.1 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman Sent: Tuesday, April 21, 2015 8:36 AM To: af@afmug.com Subject: Re: [AFMUG] ePMP Red Triangle ! Are you on 2.4.1 or exactly 2.4? Definitely upgrade to 2.4.1 and try again. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 21, 2015 at 11:33 AM, SmarterBroadband <li...@smarterbroadband.com> wrote: Rebooted a couple of times… From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman Sent: Tuesday, April 21, 2015 8:14 AM To: af@afmug.com Subject: Re: [AFMUG] ePMP Red Triangle ! Did you do a firmware upgrade and forget to reboot? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 21, 2015 at 11:07 AM, SmarterBroadband <li...@smarterbroadband.com> wrote: On a ePMP running 2.4 software set as an AP (One customer CPE connected) both radios installed yesterday. On the AP we have a red triangle with an exclamation mark in it on the Network tab in configuration. The radio will not let us save changes now, save button grayed out. Radio is operational and passing traffic. Just want to set MIR profile in AP…. Any ideas what can cause this? Hoping not to have to go to site and reset to factory defaults. Thanks Adam
