Usually when you get the red triangle there is a setting somewhere that
the radio does not like.
Take a look at the network page again and look for errors.
On 4/21/2015 10:33 AM, SmarterBroadband wrote:
Rebooted a couple of times…
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman
*Sent:* Tuesday, April 21, 2015 8:14 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] ePMP Red Triangle !
Did you do a firmware upgrade and forget to reboot?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Apr 21, 2015 at 11:07 AM, SmarterBroadband
<li...@smarterbroadband.com <mailto:li...@smarterbroadband.com>> wrote:
On a ePMP running 2.4 software set as an AP (One customer CPE
connected) both radios installed yesterday. On the AP we have a red
triangle with an exclamation mark in it on the Network tab in
configuration. The radio will not let us save changes now, save
button grayed out. Radio is operational and passing traffic. Just
want to set MIR profile in AP….
Any ideas what can cause this? Hoping not to have to go to site and
reset to factory defaults.
Thanks
Adam
