I can get them tomorrow. We are buying them locally at the hardware and I need a few more. Ill post up tomorrow night.
Best regards, Brandon Yuchasz GogebicRange.net www.gogebicrange.net <http://www.gogebicrange.net/> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke Sent: Wednesday, September 09, 2015 3:48 PM To: af@afmug.com Subject: Re: [AFMUG] Anti-seize or Brass Nuts So I don't have to re-invent the wheel, do you have the size and a source handy? On 9/8/2015 9:06 PM, Brandon Yuchasz wrote: We have swapped all of ours out with hot dipped galvanized bolts and nuts in standard threads (US) its working well. Best regards, Brandon Yuchasz GogebicRange.net www.gogebicrange.net <http://www.gogebicrange.net/> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Tuesday, September 08, 2015 5:12 PM To: af@afmug.com Subject: Re: [AFMUG] Anti-seize or Brass Nuts Special bees will construct it on site. https://www.youtube.com/watch?v=5uSVM3tJVPk From: Nate Burke <mailto:n...@blastcomm.com> Sent: Tuesday, September 08, 2015 4:30 PM To: af@afmug.com Subject: Re: [AFMUG] Anti-seize or Brass Nuts When will this magical new dish be out? Will it keep my installers from Swearing while assembling them? Can it be installed by Drone? I can just program the drone and release it from the roof of my office to go do the install? On 9/8/2015 4:26 PM, Josh Luthman wrote: It'll be a new part entirely. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 8, 2015 5:24 PM, "Nate Burke" <n...@blastcomm.com> wrote: Do the new dishes have a new part number? Or just what you get from distributors as they go through stock? On 9/8/2015 4:05 PM, Josh Luthman wrote: They already know about the hardware, the new Force dishes are much much better. As far as current stuff I don't know... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 8, 2015 5:00 PM, "Jaime Solorza" <losguyswirel...@gmail.com> wrote: Can you replace parts with hot dipped galvanized ones instead? BTW what is Force EPMP ? On Sep 8, 2015 2:54 PM, "Nate Burke" <n...@blastcomm.com> wrote: We've had to start doing our first couple EPMP takedowns (Force dishes), and it seems that the stainless nuts have seized on. Should we be hitting all installs with Anti-Seize, or would we be better off just replacing the hardware with brass/bronze nuts ala LMG? I haven't used Anti-Seize before, is it a sticky mess to work with? Would the installers actually use it, or just screw over the guy that gets sent to de-install? I'm also thinking about how to easy it would be to re-deploy the Force Dishes. Nate
