Cannot speak for the link calculator, but I can share with you the following:-
1) -64/-65 is the right signal level for a link distance of 3.5 miles 2) yes the chains should be balanced (all of them the same or +/- 1-2db), your one side is rather off ... (when you have them just right, it does take a bit of patience, each side of the chain should be similar or the same +/- 1db 3) you might want to reduce the RX gain to low, and or if you leave the gain high, try reducing the power one 1db at a time... to get the full 8x modulation... Best of Luck Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net > From: "Sterling Jacobson" <sterl...@avative.net> > To: af@afmug.com > Sent: Thursday, October 29, 2015 6:30:07 PM > Subject: Re: [AFMUG] Airfiber 24 HD > Ooops, wrong image, lol! > This is the one that I thought I attached, but didn’t show up as an > attachment. > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Faisal Imtiaz > Sent: Thursday, October 29, 2015 4:23 PM > To: af@afmug.com > Subject: Re: [AFMUG] Airfiber 24 HD > You Sure ? > Here is attached proof... doing max of 47G x 9.42G on a 100meg port ! > LOL! > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >> From: "Josh Luthman" < j...@imaginenetworksllc.com > >> To: af@afmug.com >> Sent: Thursday, October 29, 2015 6:15:02 PM >> Subject: Re: [AFMUG] Airfiber 24 HD >> Somehow I really doubt you got 8.4gbps on a gigabit port. >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Thu, Oct 29, 2015 at 6:13 PM, Sterling Jacobson < sterl...@avative.net > >> wrote: >>> Sorry, this was the picture of the link in question. >>> What should I be seeing? >>> -----Original Message----- >>> From: Af [mailto: af-boun...@afmug.com ] On Behalf Of Sterling Jacobson >>> Sent: Thursday, October 29, 2015 4:00 PM >>> To: ' af@afmug.com ' < af@afmug.com > >>> Subject: [AFMUG] Airfiber 24 HD >>> Is there a good link estimation utility for the Airfiber 24 HD? >>> I like the UBNT online link calculator, but it doesn't work with 24Ghz? >>> This is the link I just put up, shouldn't the chains all be about equal dB? >>> What does it mean when the second chain is so much different from the first >>> on >>> these units? >>> Don't even know if the dB is dialed in at this range :(
