Dont know if @UBNT-Chuck wants to chime in here but you may want to take a look at what going on with the 3.2 beta on the forum it might be more just for AFX though not real clear on that
— Sent from Mailbox On Thu, Oct 29, 2015 at 6:51 PM, Faisal Imtiaz <fai...@snappytelecom.net> wrote: > Cannot speak for the link calculator, but I can share with you the > following:- > 1) -64/-65 is the right signal level for a link distance of 3.5 miles > 2) yes the chains should be balanced (all of them the same or +/- 1-2db), > your one side is rather off ... > (when you have them just right, it does take a bit of patience, each side of > the chain should be similar or the same +/- 1db > 3) you might want to reduce the RX gain to low, and or if you leave the gain > high, try reducing the power one 1db at a time... to get the full 8x > modulation... > Best of Luck > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >> From: "Sterling Jacobson" <sterl...@avative.net> >> To: af@afmug.com >> Sent: Thursday, October 29, 2015 6:30:07 PM >> Subject: Re: [AFMUG] Airfiber 24 HD >> Ooops, wrong image, lol! >> This is the one that I thought I attached, but didn’t show up as an >> attachment. >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Faisal Imtiaz >> Sent: Thursday, October 29, 2015 4:23 PM >> To: af@afmug.com >> Subject: Re: [AFMUG] Airfiber 24 HD >> You Sure ? >> Here is attached proof... doing max of 47G x 9.42G on a 100meg port ! >> LOL! >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >>> From: "Josh Luthman" < j...@imaginenetworksllc.com > >>> To: af@afmug.com >>> Sent: Thursday, October 29, 2015 6:15:02 PM >>> Subject: Re: [AFMUG] Airfiber 24 HD >>> Somehow I really doubt you got 8.4gbps on a gigabit port. >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> On Thu, Oct 29, 2015 at 6:13 PM, Sterling Jacobson < sterl...@avative.net > >>> wrote: >>>> Sorry, this was the picture of the link in question. >>>> What should I be seeing? >>>> -----Original Message----- >>>> From: Af [mailto: af-boun...@afmug.com ] On Behalf Of Sterling Jacobson >>>> Sent: Thursday, October 29, 2015 4:00 PM >>>> To: ' af@afmug.com ' < af@afmug.com > >>>> Subject: [AFMUG] Airfiber 24 HD >>>> Is there a good link estimation utility for the Airfiber 24 HD? >>>> I like the UBNT online link calculator, but it doesn't work with 24Ghz? >>>> This is the link I just put up, shouldn't the chains all be about equal dB? >>>> What does it mean when the second chain is so much different from the >>>> first on >>>> these units? >>>> Don't even know if the dB is dialed in at this range :(
