we used those on a tower located on small mountain....the hard part was lugging the generator and fuel for hammer drill. ....I believe Hilti sell those epoxy anchors...
Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Nov 11, 2015 at 4:49 PM, Ken Hohhof <[email protected]> wrote: > I haven’t faced that problem, but I believe they make a non-pen mount for > Rohn 25G. If the sandstone is flat and level, could you use a non-pen and > rather than (or in addition to) cinder blocks, fasten the corners to the > sandstone with masonry anchors? If you don’t trust traditional anchors, I > know there are epoxy anchoring systems available for concrete. > > *From:* [email protected] > *Sent:* Wednesday, November 11, 2015 5:04 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Sandstone > > Dig a hole in the sandstone and cement in a base section. > > *From:* Randy Cosby <[email protected]> > *Sent:* Wednesday, November 11, 2015 3:51 PM > *To:* [email protected] > *Subject:* [AFMUG] Sandstone > > > Anyone have any experience or tips for putting up small (20’) Rown towers > on sandstone? > > > > Don’t? :) > > > > >
