Sticks damnit s u c k s On Wed, Nov 11, 2015, 7:17 PM Josh Luthman <j...@imaginenetworksllc.com> wrote:
> Dat auto correct > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Nov 11, 2015 at 8:10 PM, Lewis Bergman <lewis.berg...@gmail.com> > wrote: > >> Sandstone probably has poetry low break strength. We used to put small >> slabs in advance and then use the bolt on base. You could obviously or >> something in place. >> >> On Wed, Nov 11, 2015, 7:02 PM Jaime Solorza <losguyswirel...@gmail.com> >> wrote: >> > Sas >>> >>> Jaime Solorza >>> On Nov 11, 2015 5:36 PM, "Ken Hohhof" <af...@kwisp.com> wrote: >>> >>>> Jaime, if they sold Hilti underwear, you’d probably have a drawer full. >>>> >>>> Might be more likely to find a brand like Strong-Tie in a home store: >>>> https://www.youtube.com/watch?v=4Udp1Xqp2Ns >>>> >>>> But actually I see Hilti chemical anchors on the Home Depot website as >>>> well. >>>> >>>> >>>> *From:* Jaime Solorza <losguyswirel...@gmail.com> >>>> *Sent:* Wednesday, November 11, 2015 6:11 PM >>>> *To:* Animal Farm <af@afmug.com> >>>> *Subject:* Re: [AFMUG] Sandstone >>>> >>>> we used those on a tower located on small mountain....the hard part was >>>> lugging the generator and fuel for hammer drill. ....I believe Hilti sell >>>> those epoxy anchors... >>>> >>>> Jaime Solorza >>>> Wireless Systems Architect >>>> 915-861-1390 >>>> >>>> On Wed, Nov 11, 2015 at 4:49 PM, Ken Hohhof <af...@kwisp.com> wrote: >>>> >>>>> I haven’t faced that problem, but I believe they make a non-pen mount >>>>> for Rohn 25G. If the sandstone is flat and level, could you use a non-pen >>>>> and rather than (or in addition to) cinder blocks, fasten the corners to >>>>> the sandstone with masonry anchors? If you don’t trust traditional >>>>> anchors, I know there are epoxy anchoring systems available for concrete. >>>>> >>>>> *From:* ch...@wbmfg.com >>>>> *Sent:* Wednesday, November 11, 2015 5:04 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] Sandstone >>>>> >>>>> Dig a hole in the sandstone and cement in a base section. >>>>> >>>>> *From:* Randy Cosby <dco...@infowest.com> >>>>> *Sent:* Wednesday, November 11, 2015 3:51 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* [AFMUG] Sandstone >>>>> >>>>> >>>>> Anyone have any experience or tips for putting up small (20’) Rown >>>>> towers on sandstone? >>>>> >>>>> >>>>> >>>>> Don’t? :) >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>
