Or was it the Bourbon? On Wed, Nov 11, 2015, 7:19 PM Lewis Bergman <lewis.berg...@gmail.com> wrote:
> Sticks damnit s u c k s > > On Wed, Nov 11, 2015, 7:17 PM Josh Luthman <j...@imaginenetworksllc.com> > wrote: > >> Dat auto correct >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Nov 11, 2015 at 8:10 PM, Lewis Bergman <lewis.berg...@gmail.com> >> wrote: >> >>> Sandstone probably has poetry low break strength. We used to put small >>> slabs in advance and then use the bolt on base. You could obviously or >>> something in place. >>> >>> On Wed, Nov 11, 2015, 7:02 PM Jaime Solorza <losguyswirel...@gmail.com> >>> wrote: >>> >> Sas >>>> >>>> Jaime Solorza >>>> On Nov 11, 2015 5:36 PM, "Ken Hohhof" <af...@kwisp.com> wrote: >>>> >>>>> Jaime, if they sold Hilti underwear, you’d probably have a drawer full. >>>>> >>>>> Might be more likely to find a brand like Strong-Tie in a home store: >>>>> https://www.youtube.com/watch?v=4Udp1Xqp2Ns >>>>> >>>>> But actually I see Hilti chemical anchors on the Home Depot website as >>>>> well. >>>>> >>>>> >>>>> *From:* Jaime Solorza <losguyswirel...@gmail.com> >>>>> *Sent:* Wednesday, November 11, 2015 6:11 PM >>>>> *To:* Animal Farm <af@afmug.com> >>>>> *Subject:* Re: [AFMUG] Sandstone >>>>> >>>>> we used those on a tower located on small mountain....the hard part >>>>> was lugging the generator and fuel for hammer drill. ....I believe Hilti >>>>> sell those epoxy anchors... >>>>> >>>>> Jaime Solorza >>>>> Wireless Systems Architect >>>>> 915-861-1390 >>>>> >>>>> On Wed, Nov 11, 2015 at 4:49 PM, Ken Hohhof <af...@kwisp.com> wrote: >>>>> >>>>>> I haven’t faced that problem, but I believe they make a non-pen mount >>>>>> for Rohn 25G. If the sandstone is flat and level, could you use a >>>>>> non-pen >>>>>> and rather than (or in addition to) cinder blocks, fasten the corners to >>>>>> the sandstone with masonry anchors? If you don’t trust traditional >>>>>> anchors, I know there are epoxy anchoring systems available for concrete. >>>>>> >>>>>> *From:* ch...@wbmfg.com >>>>>> *Sent:* Wednesday, November 11, 2015 5:04 PM >>>>>> *To:* af@afmug.com >>>>>> *Subject:* Re: [AFMUG] Sandstone >>>>>> >>>>>> Dig a hole in the sandstone and cement in a base section. >>>>>> >>>>>> *From:* Randy Cosby <dco...@infowest.com> >>>>>> *Sent:* Wednesday, November 11, 2015 3:51 PM >>>>>> *To:* af@afmug.com >>>>>> *Subject:* [AFMUG] Sandstone >>>>>> >>>>>> >>>>>> Anyone have any experience or tips for putting up small (20’) Rown >>>>>> towers on sandstone? >>>>>> >>>>>> >>>>>> >>>>>> Don’t? :) >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>