Jaime, if they sold Hilti underwear, you’d probably have a drawer full. Might be more likely to find a brand like Strong-Tie in a home store: https://www.youtube.com/watch?v=4Udp1Xqp2Ns
But actually I see Hilti chemical anchors on the Home Depot website as well. From: Jaime Solorza Sent: Wednesday, November 11, 2015 6:11 PM To: Animal Farm Subject: Re: [AFMUG] Sandstone we used those on a tower located on small mountain....the hard part was lugging the generator and fuel for hammer drill. ....I believe Hilti sell those epoxy anchors... Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Nov 11, 2015 at 4:49 PM, Ken Hohhof <[email protected]> wrote: I haven’t faced that problem, but I believe they make a non-pen mount for Rohn 25G. If the sandstone is flat and level, could you use a non-pen and rather than (or in addition to) cinder blocks, fasten the corners to the sandstone with masonry anchors? If you don’t trust traditional anchors, I know there are epoxy anchoring systems available for concrete. From: [email protected] Sent: Wednesday, November 11, 2015 5:04 PM To: [email protected] Subject: Re: [AFMUG] Sandstone Dig a hole in the sandstone and cement in a base section. From: Randy Cosby Sent: Wednesday, November 11, 2015 3:51 PM To: [email protected] Subject: [AFMUG] Sandstone Anyone have any experience or tips for putting up small (20’) Rown towers on sandstone? Don’t? :)
