There is reason why I suggested you go the short way. The long way, is the technical attribute that can offer you a fix, but I cringe t think of how it may affect your network.
:) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "That One Guy /sarcasm" <[email protected]> > To: [email protected] > Sent: Tuesday, August 9, 2016 1:22:03 PM > Subject: Re: [AFMUG] mikrotik present as loopback address > can you detail the long way > in this instance, I just want it to be if it is traffic generated by the > router > destined for tcp port 25 present as 1.2.3.4 but dont impact anything else, > what > I dont want to risk is OSPF breaking or dropping an EOIP tunnel because that > traffic is presenting differently > On Tue, Aug 9, 2016 at 12:14 PM, Faisal Imtiaz < [email protected] > > wrote: >> There is a long way to solve this problem and there is a short way to solve >> this >> problem. >> short way first:- >> Mikrotik supports user authentication on out bound mail, so all you need to >> do >> is create a valid email user account on our mail server and use those >> credentials in your MT router Email settings so that you don't need an 'open >> mail relay'. >> Long way:- >> There is a setting call set-pref-src= in the routing filters, which >> accomplishes >> what you are asking for, however you will have to figure out on how exactly >> to >> tailor it to work for your environment. (I had to find this setting for one >> of >> our Peering Routers, a bit of a long story). >> :) >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>> From: "That One Guy /sarcasm" < [email protected] > >>> To: [email protected] >>> Sent: Tuesday, August 9, 2016 12:51:03 PM >>> Subject: [AFMUG] mikrotik present as loopback address >>> right or wrong, i want to set up an open mail relay on our network for >>> mikrotik >>> backups. I want to lock the relay down to only accept traffic from our >>> internal >>> subnet for loopback IPs on the site routers. How do I make specific traffic >>> always present as the same IP no matter which interface it exits since i >>> cant >>> seem to find a way to masquerade the output chain >>> if it is doable, is there also a way to add a line to our default configs >>> that >>> will set the presentation IP to whatever the loopback IP on that device is? >>> -- >>> If you only see yourself as part of the team but you don't see your team as >>> part >>> of yourself you have already failed as part of the team. > -- > If you only see yourself as part of the team but you don't see your team as > part > of yourself you have already failed as part of the team.
