If I remember correct the 820S is around 30w or less and 820C is higher due to dual radio/core.
Erich Kaiser North Central Tower [email protected] Office: 630-621-4804 Cell: 630-777-9291 On Mon, Aug 15, 2016 at 10:58 PM, George Skorup <[email protected]> wrote: > Question is, does the 820S need all four pairs for power, or can it be > supplied power on 1,2 & 3,6 only? 40W over only two pairs seems like it > would be ungood. I know the Netonix switches will power AF5 and 24 radios > which use all four pairs. Then the next question is per pair polarity, > which I assume is different for the 820S vs AF. > > We inject power to Exalt G2 radios using GIGE-POE-APCs with the jumpers > removed on 4,5 & 7,8. But those are max 32W or so. And in the real world, I > see them pulling about 25-27W. > > On 8/15/2016 8:58 PM, Erich Kaiser wrote: > > So looking at Cambium Forums > > http://community.cambiumnetworks.com/t5/PTP-820-Licensed-Microwave/can-i- > use-the-PTP650-PoE-Injector-for-PTP820-radio/td-p/42939 > > http://community.cambiumnetworks.com/t5/PTP-FAQ/PTP-650-Compatibilty-with- > 802-3at-standard-PoE/td-p/50740 > > https://forum.netonix.com/viewtopic.php?f=6&t=612 > > So it looks like PTP820 and PTP650 are both 802.3at pinouts. > > I will try it on Wednesday with a spare PTP820S Radio when I get the > Netonix switch. > > > Erich Kaiser > North Central Tower > [email protected] > Office: 630-621-4804 > Cell: 630-777-9291 > > > On Mon, Aug 15, 2016 at 7:41 PM, Erich Kaiser <[email protected] > > wrote: > >> I found a post on the forums about IP20C working, BTW these units work + >> or - 48v DC directly into the unit. Also if you have the POE Unit it can >> do a range from 24vdc up to like 50vdc or something. >> >> >> Erich Kaiser >> North Central Tower >> [email protected] >> Office: 630-621-4804 >> Cell: 630-777-9291 >> >> >> On Mon, Aug 15, 2016 at 7:36 PM, Faisal Imtiaz <[email protected]> >> wrote: >> >>> >>I think it's -48 or optional +24 >>> >>> Correct... the optional = another piece of equipment which is basically >>> a dual port dc to dc converted (it can take 24vdc on any polarity and and >>> put out -48dc for the radio). >>> >>> >>> Faisal Imtiaz >>> Snappy Internet & Telecom >>> 7266 SW 48 Street >>> Miami, FL 33155 >>> Tel: 305 663 5518 x 232 <305%20663%205518%20x%20232> >>> >>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>> >>> ------------------------------ >>> >>> *From: *"Sean Heskett" <[email protected]> >>> *To: *[email protected] >>> *Sent: *Monday, August 15, 2016 7:57:50 PM >>> *Subject: *Re: [AFMUG] netonix work with PTP820S? >>> >>> I think it's -48 or optional +24 >>> -Sean >>> >>> On Monday, August 15, 2016, George Skorup <[email protected]> wrote: >>> >>>> The ± is confusing. Does it support either polarity like the SAF Lumina? >>>> >>>> On 8/15/2016 5:58 PM, Sean Heskett wrote: >>>> >>>> here's the data from the manual. we installed ours a year ago and i >>>> thought the PoE cambium supplied was an 802.3at but that could have been >>>> for the PMP450i APs we deployed at the same time. >>>> >>>> Power Input Specifications >>>> • Standard Input: ‐48 VDC >>>> • IDU DC Input range: ‐40 to ‐60 VDC >>>> >>>> Power Consumption Specifications >>>> • Maximum Power Consumption 6‐11 GHz: >>>> >>>> 40W; 13‐38 GHz: 35W >>>> >>>> PoE Injector Mechanical Specifications >>>> • Dimensions – 134mm(H), 190mm(W), >>>> >>>> 62mm(D), 1 kg >>>> >>>> PoE Injector Environmental Specifications >>>> • 33°C to +55°C (‐45°C to +60°C extended) >>>> >>>> PoE Injector Power Input Specifications >>>> >>>> - >>>> >>>> Standard Input: ‐48 or +24 VDC (Optional) >>>> - >>>> >>>> DC Input range: ±(18/40.5 to 60) VDC >>>> >>>> (+18VDC extended range is supported as part of the nominal +24VDC >>>> support) >>>> >>>> PoE Injector Interfaces >>>> - >>>> >>>> GbE Data Port supporting >>>> >>>> 10/100/1000Base‐T >>>> - >>>> >>>> Power‐Over‐Ethernet (PoE) Port >>>> - >>>> >>>> DC Power Port –40V to ‐60V (a PoE >>>> >>>> supporting two redundant DC feeds each supporting ±(18‐60)V is >>>> available) >>>> >>>> >>>> >>>> >>>> On Mon, Aug 15, 2016 at 4:35 PM, George Skorup <[email protected]> >>>> wrote: >>>> >>>>> I thought they were -48? Or is that only the direct power input? >>>>> >>>>> On 8/15/2016 5:33 PM, Sean Heskett wrote: >>>>> >>>>> PTP820S is 802.3at (i believe 30W) >>>>> >>>>> -sean >>>>> >>>>> >>>>> On Mon, Aug 15, 2016 at 3:59 PM, Erich Kaiser < >>>>> [email protected]> wrote: >>>>> >>>>>> Do the Netonix switches work with PTP820S? Has anyone used them >>>>>> togther? >>>>>> >>>>>> Erich Kaiser >>>>>> North Central Tower >>>>>> [email protected] >>>>>> Office: 630-621-4804 >>>>>> Cell: 630-777-9291 >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >> > >
