Confirmed. PTP820S POE works on 48VH ports!

[image: Inline image 1]


Erich Kaiser
North Central Tower
[email protected]
Office: 630-621-4804
Cell: 630-777-9291


On Tue, Aug 16, 2016 at 7:27 AM, Erich Kaiser <[email protected]>
wrote:

> If I remember correct the 820S is around 30w or less and 820C is higher
> due to dual radio/core.
>
>
> Erich Kaiser
> North Central Tower
> [email protected]
> Office: 630-621-4804
> Cell: 630-777-9291
>
>
> On Mon, Aug 15, 2016 at 10:58 PM, George Skorup <[email protected]> wrote:
>
>> Question is, does the 820S need all four pairs for power, or can it be
>> supplied power on 1,2 & 3,6 only? 40W over only two pairs seems like it
>> would be ungood. I know the Netonix switches will power AF5 and 24 radios
>> which use all four pairs. Then the next question is per pair polarity,
>> which I assume is different for the 820S vs AF.
>>
>> We inject power to Exalt G2 radios using GIGE-POE-APCs with the jumpers
>> removed on 4,5 & 7,8. But those are max 32W or so. And in the real world, I
>> see them pulling about 25-27W.
>>
>> On 8/15/2016 8:58 PM, Erich Kaiser wrote:
>>
>> So looking at Cambium Forums
>>
>> http://community.cambiumnetworks.com/t5/PTP-820-Licensed-
>> Microwave/can-i-use-the-PTP650-PoE-Injector-for-PTP820-radio/td-p/42939
>>
>> http://community.cambiumnetworks.com/t5/PTP-FAQ/PTP-650-
>> Compatibilty-with-802-3at-standard-PoE/td-p/50740
>>
>> https://forum.netonix.com/viewtopic.php?f=6&t=612
>>
>> So it looks like PTP820 and PTP650 are both 802.3at pinouts.
>>
>> I will try it on Wednesday with a spare PTP820S Radio when I get the
>> Netonix switch.
>>
>>
>> Erich Kaiser
>> North Central Tower
>> [email protected]
>> Office: 630-621-4804
>> Cell: 630-777-9291
>>
>>
>> On Mon, Aug 15, 2016 at 7:41 PM, Erich Kaiser <
>> [email protected]> wrote:
>>
>>> I found a post on the forums about IP20C working, BTW these units work +
>>> or - 48v DC directly into the unit.  Also if you have the POE Unit it can
>>> do a range from 24vdc up to like 50vdc or something.
>>>
>>>
>>> Erich Kaiser
>>> North Central Tower
>>> [email protected]
>>> Office: 630-621-4804
>>> Cell: 630-777-9291
>>>
>>>
>>> On Mon, Aug 15, 2016 at 7:36 PM, Faisal Imtiaz <[email protected]
>>> > wrote:
>>>
>>>> >>I think it's -48 or optional +24
>>>>
>>>> Correct... the optional = another piece of equipment which is basically
>>>> a dual port dc to dc converted (it can take 24vdc on any polarity and and
>>>> put out -48dc for the radio).
>>>>
>>>>
>>>> Faisal Imtiaz
>>>> Snappy Internet & Telecom
>>>> 7266 SW 48 Street
>>>> Miami, FL 33155
>>>> Tel: 305 663 5518 x 232 <305%20663%205518%20x%20232>
>>>>
>>>> Help-desk: (305)663-5518 Option 2 or Email: [email protected]
>>>>
>>>> ------------------------------
>>>>
>>>> *From: *"Sean Heskett" <[email protected]>
>>>> *To: *[email protected]
>>>> *Sent: *Monday, August 15, 2016 7:57:50 PM
>>>> *Subject: *Re: [AFMUG] netonix work with PTP820S?
>>>>
>>>> I think it's -48 or optional +24
>>>> -Sean
>>>>
>>>> On Monday, August 15, 2016, George Skorup <[email protected]> wrote:
>>>>
>>>>> The ± is confusing. Does it support either polarity like the SAF
>>>>> Lumina?
>>>>>
>>>>> On 8/15/2016 5:58 PM, Sean Heskett wrote:
>>>>>
>>>>> here's the data from the manual.  we installed ours a year ago and i
>>>>> thought the PoE cambium supplied was an 802.3at but that could have been
>>>>> for the PMP450i APs we deployed at the same time.
>>>>>
>>>>> Power Input Specifications
>>>>> • Standard Input: ‐48 VDC
>>>>> • IDU DC Input range: ‐40 to ‐60 VDC
>>>>>
>>>>> Power Consumption Specifications
>>>>> • Maximum Power Consumption 6‐11 GHz:
>>>>>
>>>>> 40W; 13‐38 GHz: 35W
>>>>>
>>>>> PoE Injector Mechanical Specifications
>>>>> • Dimensions – 134mm(H), 190mm(W),
>>>>>
>>>>> 62mm(D), 1 kg
>>>>>
>>>>> PoE Injector Environmental Specifications
>>>>> • 33°C to +55°C (‐45°C to +60°C extended)
>>>>>
>>>>> PoE Injector Power Input Specifications
>>>>>
>>>>>    -
>>>>>
>>>>>    Standard Input: ‐48 or +24 VDC (Optional)
>>>>>    -
>>>>>
>>>>>    DC Input range: ±(18/40.5 to 60) VDC
>>>>>
>>>>>    (+18VDC extended range is supported as part of the nominal +24VDC
>>>>>    support)
>>>>>
>>>>>    PoE Injector Interfaces
>>>>>    -
>>>>>
>>>>>       GbE Data Port supporting
>>>>>
>>>>>       10/100/1000Base‐T
>>>>>       -
>>>>>
>>>>>       Power‐Over‐Ethernet (PoE) Port
>>>>>       -
>>>>>
>>>>>       DC Power Port –40V to ‐60V (a PoE
>>>>>
>>>>>       supporting two redundant DC feeds each supporting ±(18‐60)V is
>>>>>       available)
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Aug 15, 2016 at 4:35 PM, George Skorup <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> I thought they were -48? Or is that only the direct power input?
>>>>>>
>>>>>> On 8/15/2016 5:33 PM, Sean Heskett wrote:
>>>>>>
>>>>>> PTP820S is 802.3at (i believe 30W)
>>>>>>
>>>>>> -sean
>>>>>>
>>>>>>
>>>>>> On Mon, Aug 15, 2016 at 3:59 PM, Erich Kaiser <
>>>>>> [email protected]> wrote:
>>>>>>
>>>>>>> Do the Netonix switches work with PTP820S?  Has anyone used them
>>>>>>> togther?
>>>>>>>
>>>>>>> Erich Kaiser
>>>>>>> North Central Tower
>>>>>>> [email protected]
>>>>>>> Office: 630-621-4804
>>>>>>> Cell: 630-777-9291
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>>
>

Reply via email to