Yes, everything we use is Gb at least (except for the PoE brick which is 100 for the force200).
I'm running 3.0 for firmware. Thank You, Jordan Gregory Founder / CEO Hive Wireless, LLC On Thu, Aug 18, 2016 at 10:58 AM, Josh Luthman <[email protected]> wrote: > Gig ports all around? I know Justin had an issue with micro bursting, > that may have been solved with a firmware update. Are you on 2.6.2.1? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Aug 18, 2016 11:56 AM, "Jordan Gregory" <[email protected]> > wrote: > >> Link tests out at 80ish Mb by 10ish Mb >> >> Modulation is at MCS 15 >> >> Ethernet really should be an issue. >> >> If I test from the switch at the tower, I can get a full Gb to the >> internet and the AP is in a Gb port on that switch. >> >> Thank You, >> >> Jordan Gregory >> Founder / CEO >> Hive Wireless, LLC >> >> On Thu, Aug 18, 2016 at 10:53 AM, Bill Prince <[email protected]> >> wrote: >> >>> Haven't looked at the interface for those. It should display the phy >>> rate and/or give you the ability to do a link test on the RF side. Right? >>> >>> Otherwise, you may just have an upstream problem. >>> >>> >>> bp >>> <part15sbs{at}gmail{dot}com> >>> >>> >>> On 8/18/2016 8:51 AM, Josh Luthman wrote: >>> >>> Where's your 3 meg limitation? Rf or Ethernet? >>> >>> Changed channels? What modulation are you running? >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Aug 18, 2016 11:46 AM, "Jordan Gregory" <[email protected]> >>> wrote: >>> >>>> Good day list, >>>> >>>> I have a Force 200 operating at very good signal levels but for some >>>> reason, I can seem to get any more than 3Mbps out of the connection. >>>> >>>> Did i miss a setting somewhere? >>>> >>>> Backstory: Brand new wisp >>>> >>>> Thank You, >>>> >>>> Jordan Gregory >>>> Founder / CEO >>>> Hive Wireless, LLC >>>> >>> >>> >>
