The included poe brick is gig. That's being 100 could be your issue. Maybe something with flow control could solve it?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 18, 2016 12:00 PM, "Jordan Gregory" <[email protected]> wrote: > Yes, everything we use is Gb at least (except for the PoE brick which is > 100 for the force200). > > I'm running 3.0 for firmware. > > Thank You, > > Jordan Gregory > Founder / CEO > Hive Wireless, LLC > > On Thu, Aug 18, 2016 at 10:58 AM, Josh Luthman < > [email protected]> wrote: > >> Gig ports all around? I know Justin had an issue with micro bursting, >> that may have been solved with a firmware update. Are you on 2.6.2.1? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Aug 18, 2016 11:56 AM, "Jordan Gregory" <[email protected]> >> wrote: >> >>> Link tests out at 80ish Mb by 10ish Mb >>> >>> Modulation is at MCS 15 >>> >>> Ethernet really should be an issue. >>> >>> If I test from the switch at the tower, I can get a full Gb to the >>> internet and the AP is in a Gb port on that switch. >>> >>> Thank You, >>> >>> Jordan Gregory >>> Founder / CEO >>> Hive Wireless, LLC >>> >>> On Thu, Aug 18, 2016 at 10:53 AM, Bill Prince <[email protected]> >>> wrote: >>> >>>> Haven't looked at the interface for those. It should display the phy >>>> rate and/or give you the ability to do a link test on the RF side. Right? >>>> >>>> Otherwise, you may just have an upstream problem. >>>> >>>> >>>> bp >>>> <part15sbs{at}gmail{dot}com> >>>> >>>> >>>> On 8/18/2016 8:51 AM, Josh Luthman wrote: >>>> >>>> Where's your 3 meg limitation? Rf or Ethernet? >>>> >>>> Changed channels? What modulation are you running? >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Aug 18, 2016 11:46 AM, "Jordan Gregory" <[email protected]> >>>> wrote: >>>> >>>>> Good day list, >>>>> >>>>> I have a Force 200 operating at very good signal levels but for some >>>>> reason, I can seem to get any more than 3Mbps out of the connection. >>>>> >>>>> Did i miss a setting somewhere? >>>>> >>>>> Backstory: Brand new wisp >>>>> >>>>> Thank You, >>>>> >>>>> Jordan Gregory >>>>> Founder / CEO >>>>> Hive Wireless, LLC >>>>> >>>> >>>> >>> >
