Do you have a speed mismatch somewhere?
bp
<part15sbs{at}gmail{dot}com>
On 8/18/2016 9:18 AM, Jordan Gregory wrote:
I'll let you know the specific settings in a second. As far as MIR,
I'm fairly certain I haven't set that up.
Thank You,
Jordan Gregory
Founder / CEO
Hive Wireless, LLC
On Thu, Aug 18, 2016 at 11:05 AM, Kerry <[email protected]
<mailto:[email protected]>> wrote:
Here's a couple things to check,
Check the ap, is MIR under QOS enabled? if so, there should be an
entry under monitor->wireless for the sm showing the rate the sm
is 'queued' at.
The wireless link test will only show it passing roughly what it
is queued at. Also, check the MCS column. If it;s a good link it
will be at the max Rate setting configured
under the radio config of the ap
On 8/18/2016 11:46 AM, Jordan Gregory wrote:
Good day list,
I have a Force 200 operating at very good signal levels but for
some reason, I can seem to get any more than 3Mbps out of the
connection.
Did i miss a setting somewhere?
Backstory: Brand new wisp
Thank You,
Jordan Gregory
Founder / CEO
Hive Wireless, LLC
