Yeah, like 10 base T half duplex.
From: Bill Prince
Sent: Thursday, August 18, 2016 10:26 AM
To: [email protected]
Subject: Re: [AFMUG] New to list - issues (i think) with ePMP 2.4
Do you have a speed mismatch somewhere?
bp
<part15sbs{at}gmail{dot}com>
On 8/18/2016 9:18 AM, Jordan Gregory wrote:
I'll let you know the specific settings in a second. As far as MIR, I'm
fairly certain I haven't set that up.
Thank You,
Jordan Gregory
Founder / CEO
Hive Wireless, LLC
On Thu, Aug 18, 2016 at 11:05 AM, Kerry <[email protected]> wrote:
Here's a couple things to check,
Check the ap, is MIR under QOS enabled? if so, there should be an entry
under monitor->wireless for the sm showing the rate the sm is 'queued' at.
The wireless link test will only show it passing roughly what it is queued
at. Also, check the MCS column. If it;s a good link it will be at the max Rate
setting configured
under the radio config of the ap
On 8/18/2016 11:46 AM, Jordan Gregory wrote:
Good day list,
I have a Force 200 operating at very good signal levels but for some
reason, I can seem to get any more than 3Mbps out of the connection.
Did i miss a setting somewhere?
Backstory: Brand new wisp
Thank You,
Jordan Gregory
Founder / CEO
Hive Wireless, LLC
