Ben, Matt and Chuck are here, and I'm sure others. They are not deaf and
blind.
One thing the AF silicon has going for it is true FDD unlike Mimosa.
OK, I'll shut up until they reveal it for reelz and see what they came
up with.
On 9/6/2016 8:58 PM, Josh Reynolds wrote:
One thing this group needs to understand is that if you don't interact
directly with the UBNT on their forum (and draw up votes via popular
opinion), they're likely to not give a fuck.
They have a very large traffic volume on there, larger than any other
manufacturer of WISP type equipment.
Overwhelming group opinion CAN and HAS swayed them.
If you don't care to participate, they don't care about your opinion -
especially if you're not planning on buy several thousand or tens of
thousands of units.
On Sep 6, 2016 8:47 PM, "George Skorup" <geo...@cbcast.com
<mailto:geo...@cbcast.com>> wrote:
Hopefully they listened and will put a regular slip-fit waveguide
interface on the final version. Something tells me they're going
to run with the type N idea though. And I won't buy it.
On 9/6/2016 8:35 PM, Chuck McCown wrote:
Oh, is this “that” radio...
I didn’t see any N connectors in the FCC test report photo.
*From:* Josh Reynolds <mailto:j...@kyneticwifi.com>
*Sent:* Tuesday, September 06, 2016 7:33 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] AF11
Some people start forgetting things as they get older. /s
On Sep 6, 2016 8:27 PM, "Mike Hammett" <af...@ics-il.net
<mailto:af...@ics-il.net>> wrote:
I thought we already had this discussion a couple times. ;-)
-----
Mike Hammett
Intelligent Computing Solutions <http://www.ics-il.com/>
<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
Midwest Internet Exchange <http://www.midwest-ix.com/>
<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
The Brothers WISP <http://www.thebrotherswisp.com/>
<https://www.facebook.com/thebrotherswisp>
<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
------------------------------------------------------------------------
*From: *"Josh Reynolds" <j...@kyneticwifi.com
<mailto:j...@kyneticwifi.com>>
*To: *af@afmug.com <mailto:af@afmug.com>
*Sent: *Tuesday, September 6, 2016 8:26:04 PM
*Subject: *Re: [AFMUG] AF11
N connectors on top along with the GPS port
On Sep 6, 2016 8:24 PM, "Chuck McCown" <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
OK, I see the photos in the first test report. It says
there are 4 antenna ports. I presume xpic. It does
list a generic Radio Waves parabolic, but nothing
specific for the interface. I am guessing that you can
pull the bottom off the case like a canopy and find 4 sma
ports in there. 2 for TX and 2 for RX. External SMA to
circular waveguide feed perhaps but they will need a
circulator or something to split RX and TX externally.
*From:* Eric Kuhnke <mailto:eric.kuh...@gmail.com>
*Sent:* Tuesday, September 06, 2016 6:47 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] AF11
There are two photos of the unit but they do not show the
coax connectors or waveguide port.
On Tue, Sep 6, 2016 at 5:46 PM, Chuck McCown
<ch...@wbmfg.com <mailto:ch...@wbmfg.com>> wrote:
No photos. Hopefully they will be coming.
*From:* Josh Reynolds <mailto:j...@kyneticwifi.com>
*Sent:* Tuesday, September 06, 2016 6:38 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* [AFMUG] AF11
https://fccid.io/SWX-AF11FX