A handful of people is still just that. *shrug* It's your call on how much impact your voice has.
On Sep 6, 2016 10:07 PM, "George Skorup" <geo...@cbcast.com> wrote: > Ben, Matt and Chuck are here, and I'm sure others. They are not deaf and > blind. > > One thing the AF silicon has going for it is true FDD unlike Mimosa. > > OK, I'll shut up until they reveal it for reelz and see what they came up > with. > > On 9/6/2016 8:58 PM, Josh Reynolds wrote: > > One thing this group needs to understand is that if you don't interact > directly with the UBNT on their forum (and draw up votes via popular > opinion), they're likely to not give a fuck. > > They have a very large traffic volume on there, larger than any other > manufacturer of WISP type equipment. > > Overwhelming group opinion CAN and HAS swayed them. > > If you don't care to participate, they don't care about your opinion - > especially if you're not planning on buy several thousand or tens of > thousands of units. > > On Sep 6, 2016 8:47 PM, "George Skorup" <geo...@cbcast.com> wrote: > > Hopefully they listened and will put a regular slip-fit waveguide > interface on the final version. Something tells me they're going to run > with the type N idea though. And I won't buy it. > > > On 9/6/2016 8:35 PM, Chuck McCown wrote: > > Oh, is this “that” radio... > I didn’t see any N connectors in the FCC test report photo. > > *From:* Josh Reynolds <j...@kyneticwifi.com> > *Sent:* Tuesday, September 06, 2016 7:33 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] AF11 > > > Some people start forgetting things as they get older. /s > > On Sep 6, 2016 8:27 PM, "Mike Hammett" <af...@ics-il.net> wrote: > >> I thought we already had this discussion a couple times. ;-) >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions <http://www.ics-il.com/> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> Midwest Internet Exchange <http://www.midwest-ix.com/> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> The Brothers WISP <http://www.thebrotherswisp.com/> >> <https://www.facebook.com/thebrotherswisp> >> >> >> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >> ------------------------------ >> *From: *"Josh Reynolds" <j...@kyneticwifi.com> >> *To: *af@afmug.com >> *Sent: *Tuesday, September 6, 2016 8:26:04 PM >> *Subject: *Re: [AFMUG] AF11 >> >> N connectors on top along with the GPS port >> >> On Sep 6, 2016 8:24 PM, "Chuck McCown" <ch...@wbmfg.com> wrote: >> >>> OK, I see the photos in the first test report. It says there are 4 >>> antenna ports. I presume xpic. It does list a generic Radio Waves >>> parabolic, but nothing specific for the interface. I am guessing that you >>> can pull the bottom off the case like a canopy and find 4 sma ports in >>> there. 2 for TX and 2 for RX. External SMA to circular waveguide feed >>> perhaps but they will need a circulator or something to split RX and TX >>> externally. >>> >>> *From:* Eric Kuhnke <eric.kuh...@gmail.com> >>> *Sent:* Tuesday, September 06, 2016 6:47 PM >>> *To:* af@afmug.com >>> *Subject:* Re: [AFMUG] AF11 >>> >>> There are two photos of the unit but they do not show the coax >>> connectors or waveguide port. >>> >>> On Tue, Sep 6, 2016 at 5:46 PM, Chuck McCown <ch...@wbmfg.com> wrote: >>> >>>> No photos. Hopefully they will be coming. >>>> >>>> *From:* Josh Reynolds <j...@kyneticwifi.com> >>>> *Sent:* Tuesday, September 06, 2016 6:38 PM >>>> *To:* af@afmug.com >>>> *Subject:* [AFMUG] AF11 >>>> >>>> >>>> https://fccid.io/SWX-AF11FX >>>> >>> >>> >> >> > > > >