I second that second On Wed, Sep 7, 2016 at 9:50 AM, That One Guy /sarcasm < thatoneguyst...@gmail.com> wrote:
> I second that commotion > > On Wed, Sep 7, 2016 at 5:51 AM, Mike Hammett <af...@ics-il.net> wrote: > >> I'm the last person to give advice on how to get Ubiquiti to do >> something, but they finally agreed to put SFPs on things after a big push >> from me at and after WISPAmerica 2016. >> >> Going to their forums, though, just makes you feel incredibly dirty. Lots >> of dumbasses around there and I'm not necessarily talking about the >> newbies. It's the superusers that think they lay golden turds when most of >> their opinion is just that... shit. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions <http://www.ics-il.com/> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> Midwest Internet Exchange <http://www.midwest-ix.com/> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> The Brothers WISP <http://www.thebrotherswisp.com/> >> <https://www.facebook.com/thebrotherswisp> >> >> >> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >> ------------------------------ >> *From: *"Josh Reynolds" <j...@kyneticwifi.com> >> *To: *af@afmug.com >> *Sent: *Tuesday, September 6, 2016 8:58:24 PM >> *Subject: *Re: [AFMUG] AF11 >> >> One thing this group needs to understand is that if you don't interact >> directly with the UBNT on their forum (and draw up votes via popular >> opinion), they're likely to not give a fuck. >> >> They have a very large traffic volume on there, larger than any other >> manufacturer of WISP type equipment. >> >> Overwhelming group opinion CAN and HAS swayed them. >> >> If you don't care to participate, they don't care about your opinion - >> especially if you're not planning on buy several thousand or tens of >> thousands of units. >> >> On Sep 6, 2016 8:47 PM, "George Skorup" <geo...@cbcast.com> wrote: >> >> Hopefully they listened and will put a regular slip-fit waveguide >> interface on the final version. Something tells me they're going to run >> with the type N idea though. And I won't buy it. >> >> >> On 9/6/2016 8:35 PM, Chuck McCown wrote: >> >> Oh, is this “that” radio... >> I didn’t see any N connectors in the FCC test report photo. >> >> *From:* Josh Reynolds <j...@kyneticwifi.com> >> *Sent:* Tuesday, September 06, 2016 7:33 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] AF11 >> >> >> Some people start forgetting things as they get older. /s >> >> On Sep 6, 2016 8:27 PM, "Mike Hammett" <af...@ics-il.net> wrote: >> >>> I thought we already had this discussion a couple times. ;-) >>> >>> >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions <http://www.ics-il.com/> >>> <https://www.facebook.com/ICSIL> >>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>> <https://twitter.com/ICSIL> >>> Midwest Internet Exchange <http://www.midwest-ix.com/> >>> <https://www.facebook.com/mdwestix> >>> <https://www.linkedin.com/company/midwest-internet-exchange> >>> <https://twitter.com/mdwestix> >>> The Brothers WISP <http://www.thebrotherswisp.com/> >>> <https://www.facebook.com/thebrotherswisp> >>> >>> >>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >>> ------------------------------ >>> *From: *"Josh Reynolds" <j...@kyneticwifi.com> >>> *To: *af@afmug.com >>> *Sent: *Tuesday, September 6, 2016 8:26:04 PM >>> *Subject: *Re: [AFMUG] AF11 >>> >>> N connectors on top along with the GPS port >>> >>> On Sep 6, 2016 8:24 PM, "Chuck McCown" <ch...@wbmfg.com> wrote: >>> >>>> OK, I see the photos in the first test report. It says there are 4 >>>> antenna ports. I presume xpic. It does list a generic Radio Waves >>>> parabolic, but nothing specific for the interface. I am guessing that you >>>> can pull the bottom off the case like a canopy and find 4 sma ports in >>>> there. 2 for TX and 2 for RX. External SMA to circular waveguide feed >>>> perhaps but they will need a circulator or something to split RX and TX >>>> externally. >>>> >>>> *From:* Eric Kuhnke <eric.kuh...@gmail.com> >>>> *Sent:* Tuesday, September 06, 2016 6:47 PM >>>> *To:* af@afmug.com >>>> *Subject:* Re: [AFMUG] AF11 >>>> >>>> There are two photos of the unit but they do not show the coax >>>> connectors or waveguide port. >>>> >>>> On Tue, Sep 6, 2016 at 5:46 PM, Chuck McCown <ch...@wbmfg.com> wrote: >>>> >>>>> No photos. Hopefully they will be coming. >>>>> >>>>> *From:* Josh Reynolds <j...@kyneticwifi.com> >>>>> *Sent:* Tuesday, September 06, 2016 6:38 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* [AFMUG] AF11 >>>>> >>>>> >>>>> https://fccid.io/SWX-AF11FX >>>>> >>>> >>>> >>> >>> >> >> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
