UBNT forum is like survey monkey. We are the Bilderbergers... From: George Skorup Sent: Tuesday, September 06, 2016 9:07 PM To: af@afmug.com Subject: Re: [AFMUG] AF11
Ben, Matt and Chuck are here, and I'm sure others. They are not deaf and blind. One thing the AF silicon has going for it is true FDD unlike Mimosa. OK, I'll shut up until they reveal it for reelz and see what they came up with. On 9/6/2016 8:58 PM, Josh Reynolds wrote: One thing this group needs to understand is that if you don't interact directly with the UBNT on their forum (and draw up votes via popular opinion), they're likely to not give a fuck. They have a very large traffic volume on there, larger than any other manufacturer of WISP type equipment. Overwhelming group opinion CAN and HAS swayed them. If you don't care to participate, they don't care about your opinion - especially if you're not planning on buy several thousand or tens of thousands of units. On Sep 6, 2016 8:47 PM, "George Skorup" <geo...@cbcast.com> wrote: Hopefully they listened and will put a regular slip-fit waveguide interface on the final version. Something tells me they're going to run with the type N idea though. And I won't buy it. On 9/6/2016 8:35 PM, Chuck McCown wrote: Oh, is this “that” radio... I didn’t see any N connectors in the FCC test report photo. From: Josh Reynolds Sent: Tuesday, September 06, 2016 7:33 PM To: af@afmug.com Subject: Re: [AFMUG] AF11 Some people start forgetting things as they get older. /s On Sep 6, 2016 8:27 PM, "Mike Hammett" <af...@ics-il.net> wrote: I thought we already had this discussion a couple times. ;-) ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ------------------------------------------------------------------------ From: "Josh Reynolds" <j...@kyneticwifi.com> To: af@afmug.com Sent: Tuesday, September 6, 2016 8:26:04 PM Subject: Re: [AFMUG] AF11 N connectors on top along with the GPS port On Sep 6, 2016 8:24 PM, "Chuck McCown" <ch...@wbmfg.com> wrote: OK, I see the photos in the first test report. It says there are 4 antenna ports. I presume xpic. It does list a generic Radio Waves parabolic, but nothing specific for the interface. I am guessing that you can pull the bottom off the case like a canopy and find 4 sma ports in there. 2 for TX and 2 for RX. External SMA to circular waveguide feed perhaps but they will need a circulator or something to split RX and TX externally. From: Eric Kuhnke Sent: Tuesday, September 06, 2016 6:47 PM To: af@afmug.com Subject: Re: [AFMUG] AF11 There are two photos of the unit but they do not show the coax connectors or waveguide port. On Tue, Sep 6, 2016 at 5:46 PM, Chuck McCown <ch...@wbmfg.com> wrote: No photos. Hopefully they will be coming. From: Josh Reynolds Sent: Tuesday, September 06, 2016 6:38 PM To: af@afmug.com Subject: [AFMUG] AF11 https://fccid.io/SWX-AF11FX