Lol but if you go to the precious forum where the latest information is the post says "definitely within this summer".
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Sep 8, 2016 at 6:01 PM, Josh Reynolds <j...@kyneticwifi.com> wrote: > ... only for alpha testing at this time > > On Sep 8, 2016 4:42 PM, "Carl Peterson" <cpeter...@portnetworks.com> > wrote: > >> Are these things in the wild? Just got a PCN for an AF11X >> >> On Wed, Sep 7, 2016 at 10:52 AM, Mathew Howard <mhoward...@gmail.com> >> wrote: >> >>> I second that second >>> >>> On Wed, Sep 7, 2016 at 9:50 AM, That One Guy /sarcasm < >>> thatoneguyst...@gmail.com> wrote: >>> >>>> I second that commotion >>>> >>>> On Wed, Sep 7, 2016 at 5:51 AM, Mike Hammett <af...@ics-il.net> wrote: >>>> >>>>> I'm the last person to give advice on how to get Ubiquiti to do >>>>> something, but they finally agreed to put SFPs on things after a big push >>>>> from me at and after WISPAmerica 2016. >>>>> >>>>> Going to their forums, though, just makes you feel incredibly dirty. >>>>> Lots of dumbasses around there and I'm not necessarily talking about the >>>>> newbies. It's the superusers that think they lay golden turds when most of >>>>> their opinion is just that... shit. >>>>> >>>>> >>>>> >>>>> ----- >>>>> Mike Hammett >>>>> Intelligent Computing Solutions <http://www.ics-il.com/> >>>>> <https://www.facebook.com/ICSIL> >>>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>>>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>>>> <https://twitter.com/ICSIL> >>>>> Midwest Internet Exchange <http://www.midwest-ix.com/> >>>>> <https://www.facebook.com/mdwestix> >>>>> <https://www.linkedin.com/company/midwest-internet-exchange> >>>>> <https://twitter.com/mdwestix> >>>>> The Brothers WISP <http://www.thebrotherswisp.com/> >>>>> <https://www.facebook.com/thebrotherswisp> >>>>> >>>>> >>>>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >>>>> ------------------------------ >>>>> *From: *"Josh Reynolds" <j...@kyneticwifi.com> >>>>> *To: *af@afmug.com >>>>> *Sent: *Tuesday, September 6, 2016 8:58:24 PM >>>>> *Subject: *Re: [AFMUG] AF11 >>>>> >>>>> One thing this group needs to understand is that if you don't interact >>>>> directly with the UBNT on their forum (and draw up votes via popular >>>>> opinion), they're likely to not give a fuck. >>>>> >>>>> They have a very large traffic volume on there, larger than any other >>>>> manufacturer of WISP type equipment. >>>>> >>>>> Overwhelming group opinion CAN and HAS swayed them. >>>>> >>>>> If you don't care to participate, they don't care about your opinion - >>>>> especially if you're not planning on buy several thousand or tens of >>>>> thousands of units. >>>>> >>>>> On Sep 6, 2016 8:47 PM, "George Skorup" <geo...@cbcast.com> wrote: >>>>> >>>>> Hopefully they listened and will put a regular slip-fit waveguide >>>>> interface on the final version. Something tells me they're going to run >>>>> with the type N idea though. And I won't buy it. >>>>> >>>>> >>>>> On 9/6/2016 8:35 PM, Chuck McCown wrote: >>>>> >>>>> Oh, is this “that” radio... >>>>> I didn’t see any N connectors in the FCC test report photo. >>>>> >>>>> *From:* Josh Reynolds <j...@kyneticwifi.com> >>>>> *Sent:* Tuesday, September 06, 2016 7:33 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] AF11 >>>>> >>>>> >>>>> Some people start forgetting things as they get older. /s >>>>> >>>>> On Sep 6, 2016 8:27 PM, "Mike Hammett" <af...@ics-il.net> wrote: >>>>> >>>>>> I thought we already had this discussion a couple times. ;-) >>>>>> >>>>>> >>>>>> >>>>>> ----- >>>>>> Mike Hammett >>>>>> Intelligent Computing Solutions <http://www.ics-il.com/> >>>>>> <https://www.facebook.com/ICSIL> >>>>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>>>>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>>>>> <https://twitter.com/ICSIL> >>>>>> Midwest Internet Exchange <http://www.midwest-ix.com/> >>>>>> <https://www.facebook.com/mdwestix> >>>>>> <https://www.linkedin.com/company/midwest-internet-exchange> >>>>>> <https://twitter.com/mdwestix> >>>>>> The Brothers WISP <http://www.thebrotherswisp.com/> >>>>>> <https://www.facebook.com/thebrotherswisp> >>>>>> >>>>>> >>>>>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >>>>>> ------------------------------ >>>>>> *From: *"Josh Reynolds" <j...@kyneticwifi.com> >>>>>> *To: *af@afmug.com >>>>>> *Sent: *Tuesday, September 6, 2016 8:26:04 PM >>>>>> *Subject: *Re: [AFMUG] AF11 >>>>>> >>>>>> N connectors on top along with the GPS port >>>>>> >>>>>> On Sep 6, 2016 8:24 PM, "Chuck McCown" <ch...@wbmfg.com> wrote: >>>>>> >>>>>>> OK, I see the photos in the first test report. It says there are 4 >>>>>>> antenna ports. I presume xpic. It does list a generic Radio Waves >>>>>>> parabolic, but nothing specific for the interface. I am guessing that >>>>>>> you >>>>>>> can pull the bottom off the case like a canopy and find 4 sma ports in >>>>>>> there. 2 for TX and 2 for RX. External SMA to circular waveguide feed >>>>>>> perhaps but they will need a circulator or something to split RX and TX >>>>>>> externally. >>>>>>> >>>>>>> *From:* Eric Kuhnke <eric.kuh...@gmail.com> >>>>>>> *Sent:* Tuesday, September 06, 2016 6:47 PM >>>>>>> *To:* af@afmug.com >>>>>>> *Subject:* Re: [AFMUG] AF11 >>>>>>> >>>>>>> There are two photos of the unit but they do not show the coax >>>>>>> connectors or waveguide port. >>>>>>> >>>>>>> On Tue, Sep 6, 2016 at 5:46 PM, Chuck McCown <ch...@wbmfg.com> >>>>>>> wrote: >>>>>>> >>>>>>>> No photos. Hopefully they will be coming. >>>>>>>> >>>>>>>> *From:* Josh Reynolds <j...@kyneticwifi.com> >>>>>>>> *Sent:* Tuesday, September 06, 2016 6:38 PM >>>>>>>> *To:* af@afmug.com >>>>>>>> *Subject:* [AFMUG] AF11 >>>>>>>> >>>>>>>> >>>>>>>> https://fccid.io/SWX-AF11FX >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> If you only see yourself as part of the team but you don't see your >>>> team as part of yourself you have already failed as part of the team. >>>> >>> >>> >> >> >> -- >> >> Carl Peterson >> >> *PORT NETWORKS* >> >> 401 E Pratt St, Ste 2553 >> >> Baltimore, MD 21202 >> >> (410) 637-3707 >> >