lol well it wont be coming from us for a while, we are going 3ghz silent

On Thu, Oct 6, 2016 at 8:58 PM, George Skorup <[email protected]> wrote:

> Dude, I'm seeing multipath and ducting like a somebitch. Started around
> dusk. Don't beat your head into your desk. I'm seeing some 11GHz links go
> from their nominal -45ish to like -35 to -60 in just a couple minutes, and
> BER alarms like crazy. This is teh suck.
>
>
> On 10/6/2016 8:47 PM, That One Guy /sarcasm wrote:
>
> There is some nutty madness going on on a large portion of our 320
> network, it has hit multiple sites at once.
> I know much of its self induced due to too many marginal installs on very
> limited access points
>
> good CINR to SMs, even matrix B I cant even get into to manage.
>
> uplink MCS for the most part looks good until i get into the frame
> utilization, tons of 16qam 1/2 and 100% usage with only 6-12 mbps throughput
>
> I have been shifting frequencies across the network because it presented
> like interference, and a change on one AP results in required cascade
> changes across the 3ghz network since 320 sync doesnt actually work.
>
> APs are basically default layer 2, no profiles changed, 7mhz channels
> mostly ABCD 90s and some split APs. sub counts range from 10 to 35
>
> I migrated a distant part of the network to 10mhz channels and am not
> seeing this issue, but subscriber counts are low
>
> Im at my wits end on this nonsense and am about to just put every AP on
> the network in SA mode to get a visual on what my spectrum looks like
>
> we did turn up a 450 facing southwest ten miles south of another 320 AP
> thats facing south, it blinded the SMs to the 320 on a near channel even
> though they were only in the back lobe, but this is far from the others
>
> any advice from you other guys stuck with wimax would be appreciated
>
>
> --
> If you only see yourself as part of the team but you don't see your team
> as part of yourself you have already failed as part of the team.
>
>
>


-- 
If you only see yourself as part of the team but you don't see your team as
part of yourself you have already failed as part of the team.

Reply via email to