I will try these things, I do appreciate it, I also set cpe isolation to
block cpe destined packets, this should stop some idle traffic between
units shouldnt it?

On Fri, Oct 7, 2016 at 9:44 AM, Adam Moffett <dmmoff...@gmail.com> wrote:

> Our power company is also using 3.65ghz Wimax as part of their smartgrid
> system.  Sounds like it is a backhaul to their 900mhz stuff.
>
> They don't have any authentication on their Wimax system (I presume they
> limit network access by other means), so we tripped over them when some CPE
> connected to their BS and the customers called us because they had no
> internet access.
>
>
> ------ Original Message ------
> From: "Jaime Solorza" <losguyswirel...@gmail.com>
> To: "Animal Farm" <af@afmug.com>
> Sent: 10/6/2016 10:25:50 PM
> Subject: Re: [AFMUG] *&%$ 320
>
>
> GE MDS is pushing 3.65 SCADA allot
>
> On Oct 6, 2016 8:17 PM, "Ken Hohhof" <af...@kwisp.com> wrote:
>
>> George, is this due to some weird weather by you?
>>
>>
>>
>> Oh, and one thing to consider if you have 3.65 interference, I found out
>> ComEd is using 3.65 WiMAX for smartgrid, I don’t know if this is the top of
>> the hierarchy for their 900 MHz stuff, or SCADA to substations.  One tower
>> by me they have 4 sectors and I think each AP only feeds 1-2 CPEs.  It
>> didn’t help that they totally messed up the lat/lon of their tower when
>> they registered it in ULS.  Once I looked at the CPE locations and drew
>> lines following the stated azimuth, I saw they converged on a tower next to
>> a ComEd facility.
>>
>>
>>
>>
>>
>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *That One Guy
>> /sarcasm
>> *Sent:* Thursday, October 6, 2016 9:05 PM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] *&%$ 320
>>
>>
>>
>> lol well it wont be coming from us for a while, we are going 3ghz silent
>>
>>
>>
>> On Thu, Oct 6, 2016 at 8:58 PM, George Skorup <geo...@cbcast.com> wrote:
>>
>> Dude, I'm seeing multipath and ducting like a somebitch. Started around
>> dusk. Don't beat your head into your desk. I'm seeing some 11GHz links go
>> from their nominal -45ish to like -35 to -60 in just a couple minutes, and
>> BER alarms like crazy. This is teh suck.
>>
>>
>>
>> On 10/6/2016 8:47 PM, That One Guy /sarcasm wrote:
>>
>> There is some nutty madness going on on a large portion of our 320
>> network, it has hit multiple sites at once.
>>
>> I know much of its self induced due to too many marginal installs on very
>> limited access points
>>
>>
>>
>> good CINR to SMs, even matrix B I cant even get into to manage.
>>
>>
>>
>> uplink MCS for the most part looks good until i get into the frame
>> utilization, tons of 16qam 1/2 and 100% usage with only 6-12 mbps throughput
>>
>>
>>
>> I have been shifting frequencies across the network because it presented
>> like interference, and a change on one AP results in required cascade
>> changes across the 3ghz network since 320 sync doesnt actually work.
>>
>>
>>
>> APs are basically default layer 2, no profiles changed, 7mhz channels
>> mostly ABCD 90s and some split APs. sub counts range from 10 to 35
>>
>>
>>
>> I migrated a distant part of the network to 10mhz channels and am not
>> seeing this issue, but subscriber counts are low
>>
>>
>>
>> Im at my wits end on this nonsense and am about to just put every AP on
>> the network in SA mode to get a visual on what my spectrum looks like
>>
>>
>>
>> we did turn up a 450 facing southwest ten miles south of another 320 AP
>> thats facing south, it blinded the SMs to the 320 on a near channel even
>> though they were only in the back lobe, but this is far from the others
>>
>>
>>
>> any advice from you other guys stuck with wimax would be appreciated
>>
>>
>>
>>
>>
>> --
>>
>> If you only see yourself as part of the team but you don't see your team
>> as part of yourself you have already failed as part of the team.
>>
>>
>>
>>
>>
>>
>>
>> --
>>
>> If you only see yourself as part of the team but you don't see your team
>> as part of yourself you have already failed as part of the team.
>>
>


-- 
If you only see yourself as part of the team but you don't see your team as
part of yourself you have already failed as part of the team.

Reply via email to