All limited by the write read speed to media, seems to me... But parallelization to multiple servers from multiple tapes...

On 04/17/2017 09:40 AM, Chuck McCown wrote:
Time to invest in RR stock.  Screw fiber.

*From:* Forrest Christian (List Account)
*Sent:* Monday, April 17, 2017 10:33 AM
*To:* af
*Subject:* Re: [AFMUG] bulk data transfer

Well, assuming that the rail was moving at a similar speed to the trucks
- say 60MPH, And the rail cars were ~60 feet in length, and had the same
volume as the 53 foot truck.

60MPH = 316,800 FPH / 60 Feet = 5280 Railcars per hour, 88 railcars per
minute, 1.46666 rail cars per second.

Once the first one arrived, you'd have a continous feed of 26857.6Pbit/S

Get to work on the automatic tape transcription device.  You only need
to write ~557,136 tapes per second, and don't forget loading them on the
train...



On Mon, Apr 17, 2017 at 10:22 AM, Chuck McCown <[email protected]> wrote:

    No, what would it be if you had continuous railcar transport???  We
    could eliminate all the fiber with railroads!

    *From:* Forrest Christian (List Account)
    *Sent:* Monday, April 17, 2017 10:15 AM
    *To:* af
    *Subject:* Re: [AFMUG] bulk data transfer

    Chicago to LA is 30 hours by truck.

    Typical 53 foot trailer is 3816 cubic feet.

    A LTO-7 tape can hold 6TB
    The volume of a LTO-7 tape is just under 0.01 cubic foot
    (0.00839973....)  We'll use 0.01 cubic foot.

    A 53 foot trailer packed completely full can hold 381600 Tapes X 6TB
    = 2,289,600TB, or 2289 PB.

    2,289,600TB/30hours = 76320TB/hr.
    or
    1272TB/min
    or
    21.2TB/sec.
    or
    169.6Tbit/second.






    On Mon, Apr 17, 2017 at 9:39 AM, Robert Andrews
    <[email protected]> wrote:

        I can't remember which but there was a nanog presentation a few
        years ago about max bandwidth and the top of the chart was still
        listed as a 747 cargo full of optical media..   Now as far as
        getting that data on and off the media....

        On 04/17/2017 07:36 AM, Forrest Christian (List Account) wrote:

            For the seed you need to understand this quote:

            "/Never underestimate the bandwidth of a station wagon full
            of tapes
            hurtling down the highway/." —Tanenbaum, Andrew S. (1989).
            Computer
            Networks. New Jersey: Prentice-Hall. p. 57. ISBN 0-13-166836-6.

            I'd highly recommend you think about how to move that seed
            via Fedex or
            UPS.    You're already going to be storing the data
            somewhere, if
            possible, take whatever it is your storing it on (or backing
            it up on)
            to the origin location and copy it to it.... *then* ship it
            to and
            install it in your datacenter.   It is likely that the cost
            of doing
            this will actually be less than the cost of buying a circuit
            which will
            do this in a reasonable amount of time, especially if you
            are buying a
            piece of hardware to store this data (likely).

            For the updates,  4pb per year is just over 1Mb/s if I did
            the math
            correctly....   This is in the realm of normal internet,
            assuming the
            data grows gradually throughout a year.

            I'll let others point you toward a 10Gig wave if you'd
            rather not use
            the "move media" approach.


            On Mon, Apr 17, 2017 at 8:04 AM, Zach Underwood
            <[email protected]
            <mailto:[email protected]>> wrote:

                I work for a medical data company and we have a possible
            project
                where will be getting data from a human genome company.
            What would
                be a option for move the data between our datacenter and
            there
                datacenter? We are in the southeast and they are in the
            midwest. The
                data amount would be a seed of 5pb and growth of 4pb per
            year. The
                networking on our side would be 100gbit LAN.

                --
                Zach Underwood (RHCE,RHCSA,RHCT,UACA)
                My website <http://zachunderwood.me>
                advance-networking.com <http://advance-networking.com>
            <http://advance-networking.com>




            --
            *Forrest Christian* /CEO//, PacketFlux Technologies, Inc./
            Tel: 406-449-3345 <tel:406-449-3345> | Address: 3577
            Countryside Road, Helena, MT 59602
            [email protected]
            <mailto:[email protected]> | http://www.packetflux.com
            <http://www.packetflux.com/>
            <http://www.linkedin.com/in/fwchristian
            <http://www.linkedin.com/in/fwchristian>>
            <http://facebook.com/packetflux
            <http://facebook.com/packetflux>>
            <http://twitter.com/@packetflux
            <http://twitter.com/@packetflux>>





    --
    *Forrest Christian* /CEO//, PacketFlux Technologies, Inc./
    Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
    [email protected] | http://www.packetflux.com
    <http://www.packetflux.com/>
    <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> 
<http://twitter.com/@packetflux>





--
*Forrest Christian* /CEO//, PacketFlux Technologies, Inc./
Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
[email protected] | http://www.packetflux.com <http://www.packetflux.com/>
<http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> 
<http://twitter.com/@packetflux>


Reply via email to