If I understand your question.. just use the Canopy PoE pinout.  We power
SyncBox's from Netonix using this scheme.

On Thu, Jun 15, 2017 at 10:19 AM, Paul McCall <pa...@pdmnet.net> wrote:

> Hmmmm….. let me try again.
>
>
>
> I have a single FSK AP that is getting powered/ethernet successfully
> connected to a UBNT S16.  I need to get sync to that radio.  I want to
> power the SB Junior Timing Port Version by making a cable that I can
> connect to the S16 that will connect to one of the SBJTP timing ports to
> power it up.
>
>
>
> Unless that ALL FSKs timing ports actually would provide the power needed
> to power up the SBJTV ?   with a “standard” cable whatever that means 😊
>
>
>
> Paul
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Forrest Christian
> (List Account)
> *Sent:* Thursday, June 15, 2017 10:08 AM
> *To:* af <af@afmug.com>
> *Subject:* Re: [AFMUG] Powering a Syncbox Junior without a uGPS type
> device
>
>
>
> What type of fsk radio do you gave that doesn't do ups power?
>
>
>
> On Jun 15, 2017 9:04 AM, "Paul McCall" <pa...@pdmnet.net> wrote:
>
> Syncbox Junior Timing Port Version
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Forrest Christian
> (List Account)
> *Sent:* Thursday, June 15, 2017 10:03 AM
> *To:* af <af@afmug.com>
> *Subject:* Re: [AFMUG] Powering a Syncbox Junior without a uGPS type
> device
>
>
>
> Which syncbox?
>
>
>
> On Jun 15, 2017 8:51 AM, "Paul McCall" <pa...@pdmnet.net> wrote:
>
> Guys,
>
>
>
> We need to providing timing on a single FSK AP and it is fed up the tower
> through fiber to a UBNT S16. (so its powering off the S16).   I want to use
> one timing port to output timing to the FSK (as normal) and one port to
> receive power from the S16 and need to figure out the pinout (wiring
> diagram) to make that happen.
>
>
>
> Paul
>
>
>
> Paul McCall, President
>
> PDMNet, Inc. / Florida Broadband, Inc.
>
> 658 Old Dixie Highway
>
> Vero Beach, FL 32962
>
> 772-564-6800 <(772)%20564-6800>
>
> pa...@pdmnet.net
>
> www.pdmnet.com
>
> www.floridabroadband.com
>
>
>
>
>
>

Reply via email to