Hmm. ... odd. I know it's in the 450, but I thought it was in the older radios too.
I'm traveling, so can't look it up, but what does the uGPS manual say about FSK radios? On Jun 15, 2017 9:42 AM, "George Skorup" <george.sko...@cbcast.com> wrote: > I don't have a single P10 or P11 FSK AP that has UGPS power control on the > config page. Perhaps it's just always on? > > On 6/15/2017 9:35 AM, Forrest Christian (List Account) wrote: > > AFAIK All semi-modern fsk radios provide uGPS power. Just connect the > radio and box together and turn on uGPS power in the radio. Use whatever > cable cambium recommends for a uGPS probably just a 6p6c straight through > cable, although it might make sense to skip the factory reset pin. > > > > On Jun 15, 2017 9:19 AM, "Paul McCall" <pa...@pdmnet.net> wrote: > >> Hmmmm….. let me try again. >> >> >> >> I have a single FSK AP that is getting powered/ethernet successfully >> connected to a UBNT S16. I need to get sync to that radio. I want to >> power the SB Junior Timing Port Version by making a cable that I can >> connect to the S16 that will connect to one of the SBJTP timing ports to >> power it up. >> >> >> >> Unless that ALL FSKs timing ports actually would provide the power needed >> to power up the SBJTV ? with a “standard” cable whatever that means 😊 >> >> >> >> Paul >> >> >> >> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Forrest >> Christian (List Account) >> *Sent:* Thursday, June 15, 2017 10:08 AM >> *To:* af <af@afmug.com> >> *Subject:* Re: [AFMUG] Powering a Syncbox Junior without a uGPS type >> device >> >> >> >> What type of fsk radio do you gave that doesn't do ups power? >> >> >> >> On Jun 15, 2017 9:04 AM, "Paul McCall" <pa...@pdmnet.net> wrote: >> >> Syncbox Junior Timing Port Version >> >> >> >> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Forrest >> Christian (List Account) >> *Sent:* Thursday, June 15, 2017 10:03 AM >> *To:* af <af@afmug.com> >> *Subject:* Re: [AFMUG] Powering a Syncbox Junior without a uGPS type >> device >> >> >> >> Which syncbox? >> >> >> >> On Jun 15, 2017 8:51 AM, "Paul McCall" <pa...@pdmnet.net> wrote: >> >> Guys, >> >> >> >> We need to providing timing on a single FSK AP and it is fed up the tower >> through fiber to a UBNT S16. (so its powering off the S16). I want to use >> one timing port to output timing to the FSK (as normal) and one port to >> receive power from the S16 and need to figure out the pinout (wiring >> diagram) to make that happen. >> >> >> >> Paul >> >> >> >> Paul McCall, President >> >> PDMNet, Inc. / Florida Broadband, Inc. >> >> 658 Old Dixie Highway >> >> Vero Beach, FL 32962 >> >> 772-564-6800 <%28772%29%20564-6800> >> >> pa...@pdmnet.net >> >> www.pdmnet.com >> >> www.floridabroadband.com >> >> >> >> >> >> >
