One FSK AP? Just put a Parasitic pipe on it.
The 4-port SBJ aux & timing port versions are basically identical. Aux =
RJ45. Timing port = RJ12. Obviously requires UGPS power capable radios.
You can always do a regular SBJ deluxe which has a dedicated
SyncInjector/power port. If it was me, I'd just use a Parasitic pipe
since we usually have some of those laying around.
On 6/15/2017 9:24 AM, Paul McCall wrote:
There is no RJ45 input on the SBJTP version. We power lots of other
RJ45 devices of the S16 with special cables. This is a different animal
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Baird
*Sent:* Thursday, June 15, 2017 10:21 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Powering a Syncbox Junior without a uGPS type
device
If I understand your question.. just use the Canopy PoE pinout. We
power SyncBox's from Netonix using this scheme.
On Thu, Jun 15, 2017 at 10:19 AM, Paul McCall <pa...@pdmnet.net
<mailto:pa...@pdmnet.net>> wrote:
Hmmmm….. let me try again.
I have a single FSK AP that is getting powered/ethernet
successfully connected to a UBNT S16. I need to get sync to that
radio. I want to power the SB Junior Timing Port Version by
making a cable that I can connect to the S16 that will connect to
one of the SBJTP timing ports to power it up.
Unless that ALL FSKs timing ports actually would provide the power
needed to power up the SBJTV ? with a “standard” cable whatever
that means 😊
Paul
*From:* Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *Forrest Christian
(List Account)
*Sent:* Thursday, June 15, 2017 10:08 AM
*To:* af <af@afmug.com <mailto:af@afmug.com>>
*Subject:* Re: [AFMUG] Powering a Syncbox Junior without a uGPS
type device
What type of fsk radio do you gave that doesn't do ups power?
On Jun 15, 2017 9:04 AM, "Paul McCall" <pa...@pdmnet.net
<mailto:pa...@pdmnet.net>> wrote:
Syncbox Junior Timing Port Version
*From:* Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *Forrest
Christian (List Account)
*Sent:* Thursday, June 15, 2017 10:03 AM
*To:* af <af@afmug.com <mailto:af@afmug.com>>
*Subject:* Re: [AFMUG] Powering a Syncbox Junior without a
uGPS type device
Which syncbox?
On Jun 15, 2017 8:51 AM, "Paul McCall" <pa...@pdmnet.net
<mailto:pa...@pdmnet.net>> wrote:
Guys,
We need to providing timing on a single FSK AP and it is
fed up the tower through fiber to a UBNT S16. (so its
powering off the S16). I want to use one timing port to
output timing to the FSK (as normal) and one port to
receive power from the S16 and need to figure out the
pinout (wiring diagram) to make that happen.
Paul
Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 <tel:%28772%29%20564-6800>
pa...@pdmnet.net <mailto:pa...@pdmnet.net>
www.pdmnet.com <http://www.pdmnet.com>
www.floridabroadband.com <http://www.floridabroadband.com>