Plate modulation is indeed a "possible" path to take. If so, then you must decide whether to "outboard" the plate tranny - OR begin to hack up the DX-60.
Each follows their "own" path. Personally I chose to go with NO plate modulation, leaving the radio as controlled carrier. I made some of the WC3K mods. Then again, I also knew Bill personally and made a number of trips to his "Laboratory"/Ham Shack. I went to a TX-1 for a plate modulated Heath rig. It was shortly followed by the addition of a BC-610. Bob - N0DGN On 7/2/2010 4:06 PM, Ken Sands wrote: > Use the plate modulator it should work fine with a D-104. Good luck! > > Ken K8TFD 3880 AM 1880 AM ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
