This is the output when starting wpa_supplicant: Initializing interface 'wlan0' conf '/system/etc/wifi/ wpa_supplicant.conf' drive r 'wext' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/system/etc/wifi/wpa_supplicant.conf' -> '/system/ etc/wifi/ w pa_supplicant.conf' Reading configuration file '/system/etc/wifi/wpa_supplicant.conf' update_config=1 ctrl_interface='DIR=/data/system/wpa_supplicant/ GROUP=system' eapol_version=1 ap_scan=1 fast_reauth=1 Initializing interface (2) 'wlan0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:22:43:2c:fa:a6 wpa_driver_wext_set_wpa wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_countermeasures ioctl[SIOCSIWAUTH]: Operation not supported on transport endpoint WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted Setting scan request: 0 sec 100000 usec ctrl_interface_group=1000 (from group name 'system') Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b06 len=8 Ignore event for foreign ifindex 4 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING CTRL-EVENT-STATE-CHANGE id=-1 state=2 Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received 0 bytes of scan results (0 BSSes) Scan results: 0 CTRL-EVENT-SCAN-RESULTS Ready No suitable AP found. Setting scan request: 0 sec 0 usec No enabled networks - do not scan State: SCANNING -> INACTIVE CTRL-EVENT-STATE-CHANGE id=-1 state=1
On 27 mrt, 11:39, Androidphan <niels.kee...@tass.nl> wrote: > I'm getting the following error at the moment: > D/WifiHW ( 2325): Unable to open connection to supplicant on "/data/ > system/wpa_supplicant/wlan0": No such file or directory > > I got wpa_supplicant running. > > # ls -l /data/system/wpa_supplicant/ > srwxrwx--- root system 2009-03-27 11:39 wlan0 > > So it exists. > > Why is this?? --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
