<https://lh3.googleusercontent.com/-wyyLIhgNriU/VBel5J7DGlI/AAAAAAAAAFs/UOuw9H1deCU/s1600/cameraConnecttor.jpg>
Thanks for your reply!
1. Here this connector I used. Hi253 Camera connect with DM3730 AP Module
through I2C Bus and Parallel Interface (CAM D2,...,CAM D9) as above image.
2. Here Source code Hi253 Driver that I use:
https://github.com/allwinner-ics/lichee_linux-3.0/blob/master/drivers/media/video/sun4i_csi/device/hi253.c
Have you give me any advise?
Vào 10:00:55 UTC+7 Thứ hai, ngày 15 tháng chín năm 2014, chinda keodouangsy
đã viết:
>
> That's lead to the question I've asked before, as there are some Hardware
> dependencies:
> - *** How do you connect the hi253 camera to your board?
> Check the vendor document to know on which bus (USB, PCI or
> i2c) the hi253 used to connect to the system.
> Normally the hi253 code should help you to identify the bus
> used to connect to the system.
>
> What is for sure is that the mt9v113 does use i2c bus to connect to the
> system (e.g. your board).
>
>
>
>
>
> Le 12/09/2014 09:50, Việt Hoàng a écrit :
>
> I have checked existing HAL camera on Link that I posted. But on file:
> V4L2camera.cpp only support 3 sensor camera: mt9v113, mt9t111, tvp514x.
> 1 - On hi253 driver, it register with v4l2 interface with funtion:
> - v4l2_int_device_register(&hi253_int_device);
> 2 - On mt9v113 driver, it register with v4l2 inter with 2 functions:
> - /*
> * Register as a subdev
> */
> v4l2_i2c_subdev_init(&mt9v113->subdev, client, &mt9v113_ops);
> mt9v113->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>
> /*
> * Register as media entity
> */
> mt9v113->pad.flags = MEDIA_PAD_FLAG_OUTPUT;
> ret = media_entity_init(&mt9v113->subdev.entity, 1, &mt9v113->pad, 0);
> f
> I don't understand about this different. I am stucking here. Can you show
> me a solution?
> Vào 23:35:40 UTC+7 Thứ ba, ngày 09 tháng chín năm 2014, ckkeo đã viết:
>>
>> I just answered your other thread!
>>
>> Did you have any camera comes with your board today?
>>
>> Check and locate your existing HAL camera source code. (i.e. Did you see
>> any camera folder within the <panther-bsp>/hardware folder ?)
>> Sure that it's better if you can get the HAL code from the vendor. (make
>> sure that the HAL can drive the V4L2 driver).
>>
>> Chinda
>>
>>
>> Le 09/09/2014 11:04, Việt Hoàng a écrit :
>>
>> Thank you verry much!
>> I am clearly steps in integrate process.
>> I was success re-build kernel that add hi-253 driver. But i don't
>> understand about:
>>
>> 1 - Is Hi-253 driver compatibility with HAL camera at patch:
>> http://processors.wiki.ti.com/images/6/6c/0001-HAL-camera-support-added-for-beagleboard.patch.gz
>> or i have to contact with vendors for HAL camera?
>> Thank you!
>>
>> Regards,
>> VietHQ
>> Do your best, the rest you come!
>>
>> Vào 04:04:40 UTC+7 Thứ ba, ngày 09 tháng chín năm 2014, ckkeo đã viết:
>>>
>>> In clear you have to do these below steps:
>>>
>>> -------------------------
>>> The kernel part
>>> ------------------------
>>> 1 - Integrate the hi253 device driver into your Panther board kernel
>>> a - Add the driver source code to your kernel
>>> b - Configure OMAP to recognize your hi253 camera
>>> c - Enable the Camera Module to your kernel config
>>>
>>> The patch for these steps have been provided in the TI's porting
>>> guide at this link :
>>> http://processors.wiki.ti.com/images/a/aa/0001-camera-sensor-support-mt9v113-for-beagleboard.patch.gz
>>> All you have to do is apply the patch to your kernel.
>>>
>>> 2 - Re-build your kernel
>>>
>>> You can refer to this link for How to build the kernel :
>>> http://processors.wiki.ti.com/index.php/TI-Android-FroYo-DevKit-V2_UserGuide#Kernel
>>>
>>> ----------------------
>>> android part
>>> ---------------------
>>> 3 - Add the Camera HAL interface to your android plateform
>>>
>>> Per TI's porting Guide, the patch is here :
>>> http://processors.wiki.ti.com/images/6/6c/0001-HAL-camera-support-added-for-beagleboard.patch.gz
>>> Also per TI's porting guide for Froyo release the patch should be
>>> applied at <ANDROID_ROOT>/hardware/ti/omap3/camera, to check on your
>>> android plateform development source code the V4L2 part.
>>>
>>> 4 - Re-build the android system and give a try
>>>
>>> Hope this clarified a little bit for you.
>>>
>>> Chinda
>>>
>>>
>>> Le 08/09/2014 08:57, Việt Hoàng a écrit :
>>>
>>> i was stuck there. But i can'n find who help me. haizzzz. So sad.
>>>
>>> Vào 17:15:55 UTC+7 Thứ hai, ngày 23 tháng sáu năm 2014, Hao Nguyen đã
>>> viết:
>>>>
>>>> I am working on panther board and i want to use hi253 camera module in
>>>> my board. I've read porting guide on
>>>> http://processors.wiki.ti.com/index.php/TI-Android-DevKit-Camera_Porting_Guide
>>>>
>>>> but i didn't still understand. Can anyone give me some infomation relate
>>>> to
>>>> my problems? I have recenty worked on embedded kit so i don't have much
>>>> knowledge about it. Thanks for reading!!
>>>>
>>> --
>>> --
>>> unsubscribe: android-porti...@googlegroups.com
>>> website: http://groups.google.com/group/android-porting
>>>
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "android-porting" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to android-porti...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>>
>>>
>>>
>>> ------------------------------
>>> <http://www.avast.com/>
>>>
>>> Ce courrier électronique ne contient aucun virus ou logiciel malveillant
>>> parce que la protection Antivirus avast! <http://www.avast.com/> est
>>> active.
>>>
>>> --
>> --
>> unsubscribe: android-porti...@googlegroups.com
>> website: http://groups.google.com/group/android-porting
>>
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "android-porting" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to android-porti...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>>
>>
>>
>> ------------------------------
>> <http://www.avast.com/>
>>
>> Ce courrier électronique ne contient aucun virus ou logiciel malveillant
>> parce que la protection Antivirus avast! <http://www.avast.com/> est
>> active.
>>
>> --
> --
> unsubscribe: android-porti...@googlegroups.com <javascript:>
> website: http://groups.google.com/group/android-porting
>
> ---
> You received this message because you are subscribed to the Google Groups
> "android-porting" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to android-porti...@googlegroups.com <javascript:>.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
>
> ------------------------------
> <http://www.avast.com/>
>
> Ce courrier électronique ne contient aucun virus ou logiciel malveillant
> parce que la protection Antivirus avast! <http://www.avast.com/> est
> active.
>
>
--
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
---
You received this message because you are subscribed to the Google Groups
"android-porting" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to android-porting+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.