Hi Clarence,
I am writing this using A1.66 core after
making connection with A1.64 core. So the A1.66 core
works after the TCP/IP connection is made. It just
refuses to make connection for some reason.
Eric
I just wrote:
>
>Hi Clarence,
> I tried your debug suggestions. The ppp.log
>looked the same when I connected with core 164 as when
>I couldn't connect with core 166. The ppp.log had only
>one line in either case:
>
> PPPD status: IP address set to 63.20.101.117
>
>The only difference was the IP addresses were different.
>I assume the address changes with each connection since
>they are dynamically assigned, as I understand it.
>
>The only thing I change in the whole Arachne setup is
>the core.exe file. With A1.64 core I connect with no
>problem but with A1.66 core the TCP/IP fails.
>
>I'm perplexed,
> Eric
>
>
>Clarence Verge wrote:
>>----<snip>----
>>I aborted (ESC), altEd and examined PPP.log. It showed the connect as done
>>up to starting PPP. So I typed EPPPD at the DOS prompt. It failed to load
>>and gave me the info regarding the error condition.
>>Try that.
>>- Clarence Verge
--
__________
| Ayrx |__\_ Eric S. Emerson
| E-male:~_: ! [EMAIL PROTECTED]
`~(*)~~~~(*)~' `````````````````````````
