We purchased the card from a distributor in Mississauga. As far as I know the Digium cards are supposed to be good though? They're the company that designed Asterisk! I would hope it's not too cheap. Cost was about $450
What FXS/SIP device are you using? Steven On Mon, Aug 18, 2008 at 4:43 PM, Alex Wang <[EMAIL PROTECTED]> wrote: > I use to using those cheap card and I had same problem as yours. After > switch to the FXS/SIP device. I don't have any problem with CID. No idea > with TDM card. Are they OEM? > > > Alex > > On Mon, 18 Aug 2008 16:11:19 -0400 > "Steven McCann" <[EMAIL PROTECTED]> wrote: > > > I'm using a Digium TDM410.. The same issue also happened with a previous > > card, the TDM400P > > > > Steven > > > > On Mon, Aug 18, 2008 at 1:14 PM, Alex Wang <[EMAIL PROTECTED]> > wrote: > > > > > What kind of card did you use? > > > > > > > > > Alex > > > > > > On Mon, 18 Aug 2008 12:49:38 -0400 > > > "Steven McCann" <[EMAIL PROTECTED]> wrote: > > > > > > > Hello all, > > > > > > > > Since hooked up a Trixbox system last year, we have not yet gotten > Caller > > > ID > > > > to work on most incoming calls. 80% of all calls come up as 'unknown' > > > > > > > > I have tried to add some config that I saw in an earlier email > thread, > > > but > > > > it does not seem to be working: > > > > usecallerid=yes > > > > hidecallerid=no > > > > cidsignalling=bell > > > > callerid=asreceived > > > > sendcalleridafter=3 > > > > cidstart=ring > > > > callwaiting=yes > > > > usecallingpres=yes > > > > callwaitingcallerid=yes > > > > > > > > I've also tried to change cidsignalling to =dtmf, =dtmf, bell , > but > > > this > > > > does not seem to make a difference. > > > > > > > > I know CID is there on most calls, because I could previously see it > on a > > > > fax machine that was also hooked up to the main POTS line. > > > > > > > > Any ideas? > > > > > > > > Thanks, > > > > Steven > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > >
