We are just in the process of getting our lines replaced do to some buzzing on them.. but I suspect it is some config issue, because one of the lines has no buzz and no CID has been coming for it also.
Steven FYI Here's our current config for zaptel.conf. cidsignalling has been changed to 'bell,dtmf' and 'dtmf' and hasn't seemed to make a difference... ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=en context=from-zaptel signalling=fxs_ks rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes ;added apr 5 by steve to try and fix long vm's busydetect=yes busycount=15 ;added Aug 18 by Steve to get CID usecallerid=yes hidecallerid=no cidsignalling=bell callerid=asreceived sendcalleridafter=2 cidstart=ring ;was already here-aug18-sm callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no ;echotraining=800 rxgain=3.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include genzaptelconf configs #include zapata-auto.conf group=1 ;Include AMP configs #include zapata_additional.conf On Tue, Aug 19, 2008 at 10:25 AM, Elliott Jeyaseelan <[EMAIL PROTECTED]> wrote: > I have 2 TDM400P and both worked well...never had any trouble with CID. > > Possibly too much noise on your line? Wires reversed, maybe a faulty > telephone equipment connected on the line..... > > > -----Original Message----- > > From: Steven McCann [mailto:[EMAIL PROTECTED] > > Sent: Monday, August 18, 2008 4:11 PM > > To: Alex Wang > > Cc: Toronto Asterisk UG > > Subject: Re: [on-asterisk] need CID setting for > > Asterisk/Trixbox for Bell POTS in Ontario using TDM410 > > > > I'm using a Digium TDM410.. The same issue also happened with > > a previous card, the TDM400P > > > > Steven > > > > On Mon, Aug 18, 2008 at 1:14 PM, Alex Wang > > <[EMAIL PROTECTED]> wrote: > > > > > What kind of card did you use? > > > > > > > > > Alex > > > > > > On Mon, 18 Aug 2008 12:49:38 -0400 > > > "Steven McCann" <[EMAIL PROTECTED]> wrote: > > > > > > > Hello all, > > > > > > > > Since hooked up a Trixbox system last year, we have not > > yet gotten > > > > Caller > > > ID > > > > to work on most incoming calls. 80% of all calls come up > > as 'unknown' > > > > > > > > I have tried to add some config that I saw in an earlier email > > > > thread, > > > but > > > > it does not seem to be working: > > > > usecallerid=yes > > > > hidecallerid=no > > > > cidsignalling=bell > > > > callerid=asreceived > > > > sendcalleridafter=3 > > > > cidstart=ring > > > > callwaiting=yes > > > > usecallingpres=yes > > > > callwaitingcallerid=yes > > > > > > > > I've also tried to change cidsignalling to =dtmf, =dtmf, > > bell , but > > > this > > > > does not seem to make a difference. > > > > > > > > I know CID is there on most calls, because I could > > previously see it > > > > on a fax machine that was also hooked up to the main POTS line. > > > > > > > > Any ideas? > > > > > > > > Thanks, > > > > Steven > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > > > commands, e-mail: [EMAIL PROTECTED] > > > > > > > > >
