Asterisk 1.4.18.1-2 RPM by [EMAIL PROTECTED] built by root @ trixbuild-2.5 on a i686 running Linux on 2008-03-27 18:02:30 UTC
Trixbox.2.4 On Tue, Aug 19, 2008 at 4:34 PM, Elliott Jeyaseelan <[EMAIL PROTECTED]> wrote: > Steve, > > What is your Asterisk version #? > > ------------------------------ > *From:* Steven McCann [mailto:[EMAIL PROTECTED] > *Sent:* Tuesday, August 19, 2008 4:27 PM > *To:* Elliott Jeyaseelan > *Cc:* Alex Wang; Toronto Asterisk UG > > *Subject:* Re: [on-asterisk] need CID setting for Asterisk/Trixbox for > Bell POTS in Ontario using TDM410 > > We are just in the process of getting our lines replaced do to some > buzzing on them.. but I suspect it is some config issue, because one of the > lines has no buzz and no CID has been coming for it also. > > Steven > > FYI Here's our current config for zaptel.conf. cidsignalling has been > changed to 'bell,dtmf' and 'dtmf' and hasn't seemed to make a difference... > > > ; > ; Zapata telephony interface > ; > ; Configuration file > > [trunkgroups] > > [channels] > > language=en > context=from-zaptel > signalling=fxs_ks > rxwink=300 ; Atlas seems to use long (250ms) winks > ; > ; Whether or not to do distinctive ring detection on FXO lines > ; > ;usedistinctiveringdetection=yes > > ;added apr 5 by steve to try and fix long vm's > busydetect=yes > busycount=15 > > ;added Aug 18 by Steve to get CID > usecallerid=yes > hidecallerid=no > cidsignalling=bell > callerid=asreceived > sendcalleridafter=2 > cidstart=ring > > ;was already here-aug18-sm > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=no > ;echotraining=800 > rxgain=3.0 > txgain=0.0 > group=0 > callgroup=1 > pickupgroup=1 > immediate=no > > ;faxdetect=both > faxdetect=incoming > ;faxdetect=outgoing > ;faxdetect=no > > ;Include genzaptelconf configs > #include zapata-auto.conf > > group=1 > > ;Include AMP configs > #include zapata_additional.conf > > > > > On Tue, Aug 19, 2008 at 10:25 AM, Elliott Jeyaseelan <[EMAIL PROTECTED]> > wrote: > >> I have 2 TDM400P and both worked well...never had any trouble with CID. >> >> Possibly too much noise on your line? Wires reversed, maybe a faulty >> telephone equipment connected on the line..... >> >> > -----Original Message----- >> > From: Steven McCann [mailto:[EMAIL PROTECTED] >> > Sent: Monday, August 18, 2008 4:11 PM >> > To: Alex Wang >> > Cc: Toronto Asterisk UG >> > Subject: Re: [on-asterisk] need CID setting for >> > Asterisk/Trixbox for Bell POTS in Ontario using TDM410 >> > >> > I'm using a Digium TDM410.. The same issue also happened with >> > a previous card, the TDM400P >> > >> > Steven >> > >> > On Mon, Aug 18, 2008 at 1:14 PM, Alex Wang >> > <[EMAIL PROTECTED]> wrote: >> > >> > > What kind of card did you use? >> > > >> > > >> > > Alex >> > > >> > > On Mon, 18 Aug 2008 12:49:38 -0400 >> > > "Steven McCann" <[EMAIL PROTECTED]> wrote: >> > > >> > > > Hello all, >> > > > >> > > > Since hooked up a Trixbox system last year, we have not >> > yet gotten >> > > > Caller >> > > ID >> > > > to work on most incoming calls. 80% of all calls come up >> > as 'unknown' >> > > > >> > > > I have tried to add some config that I saw in an earlier email >> > > > thread, >> > > but >> > > > it does not seem to be working: >> > > > usecallerid=yes >> > > > hidecallerid=no >> > > > cidsignalling=bell >> > > > callerid=asreceived >> > > > sendcalleridafter=3 >> > > > cidstart=ring >> > > > callwaiting=yes >> > > > usecallingpres=yes >> > > > callwaitingcallerid=yes >> > > > >> > > > I've also tried to change cidsignalling to =dtmf, =dtmf, >> > bell , but >> > > this >> > > > does not seem to make a difference. >> > > > >> > > > I know CID is there on most calls, because I could >> > previously see it >> > > > on a fax machine that was also hooked up to the main POTS line. >> > > > >> > > > Any ideas? >> > > > >> > > > Thanks, >> > > > Steven >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > --------------------------------------------------------------------- >> > > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional >> > > commands, e-mail: [EMAIL PROTECTED] >> > > >> > > >> > >> > >
