I have 2 TDM400P and both worked well...never had any trouble with CID.

Possibly too much noise on your line? Wires reversed, maybe a faulty
telephone equipment connected on the line..... 

> -----Original Message-----
> From: Steven McCann [mailto:[EMAIL PROTECTED] 
> Sent: Monday, August 18, 2008 4:11 PM
> To: Alex Wang
> Cc: Toronto Asterisk UG
> Subject: Re: [on-asterisk] need CID setting for 
> Asterisk/Trixbox for Bell POTS in Ontario using TDM410
> 
> I'm using a Digium TDM410.. The same issue also happened with 
> a previous card, the TDM400P
> 
> Steven
> 
> On Mon, Aug 18, 2008 at 1:14 PM, Alex Wang 
> <[EMAIL PROTECTED]> wrote:
> 
> > What kind of card did you use?
> >
> >
> > Alex
> >
> > On Mon, 18 Aug 2008 12:49:38 -0400
> > "Steven McCann" <[EMAIL PROTECTED]> wrote:
> >
> > > Hello all,
> > >
> > > Since hooked up a Trixbox system last year, we have not 
> yet gotten 
> > > Caller
> > ID
> > > to work on most incoming calls. 80% of all calls come up 
> as 'unknown'
> > >
> > > I have tried to add some config that I saw in an earlier email 
> > > thread,
> > but
> > > it does not seem to be working:
> > > usecallerid=yes
> > > hidecallerid=no
> > > cidsignalling=bell
> > > callerid=asreceived
> > > sendcalleridafter=3
> > > cidstart=ring
> > > callwaiting=yes
> > > usecallingpres=yes
> > > callwaitingcallerid=yes
> > >
> > > I've also tried to change cidsignalling to =dtmf, =dtmf, 
> bell    , but
> > this
> > > does not seem to make a difference.
> > >
> > > I know CID is there on most calls, because I could 
> previously see it 
> > > on a fax machine that was also hooked up to the main POTS line.
> > >
> > > Any ideas?
> > >
> > > Thanks,
> > > Steven
> >
> >
> >
> >
> >
> >
> > 
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional 
> > commands, e-mail: [EMAIL PROTECTED]
> >
> >
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to