Steve,
What is your Asterisk version #?
________________________________
From: Steven McCann [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 19, 2008 4:27 PM
To: Elliott Jeyaseelan
Cc: Alex Wang; Toronto Asterisk UG
Subject: Re: [on-asterisk] need CID setting for Asterisk/Trixbox
for Bell POTS in Ontario using TDM410
We are just in the process of getting our lines replaced do to
some buzzing on them.. but I suspect it is some config issue, because
one of the lines has no buzz and no CID has been coming for it also.
Steven
FYI Here's our current config for zaptel.conf. cidsignalling has
been changed to 'bell,dtmf' and 'dtmf' and hasn't seemed to make a
difference...
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
;added apr 5 by steve to try and fix long vm's
busydetect=yes
busycount=15
;added Aug 18 by Steve to get CID
usecallerid=yes
hidecallerid=no
cidsignalling=bell
callerid=asreceived
sendcalleridafter=2
cidstart=ring
;was already here-aug18-sm
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=800
rxgain=3.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
On Tue, Aug 19, 2008 at 10:25 AM, Elliott Jeyaseelan
<[EMAIL PROTECTED]> wrote:
I have 2 TDM400P and both worked well...never had any
trouble with CID.
Possibly too much noise on your line? Wires reversed,
maybe a faulty
telephone equipment connected on the line.....
> -----Original Message-----
> From: Steven McCann [mailto:[EMAIL PROTECTED]
> Sent: Monday, August 18, 2008 4:11 PM
> To: Alex Wang
> Cc: Toronto Asterisk UG
> Subject: Re: [on-asterisk] need CID setting for
> Asterisk/Trixbox for Bell POTS in Ontario using TDM410
>
> I'm using a Digium TDM410.. The same issue also
happened with
> a previous card, the TDM400P
>
> Steven
>
> On Mon, Aug 18, 2008 at 1:14 PM, Alex Wang
> <[EMAIL PROTECTED]> wrote:
>
> > What kind of card did you use?
> >
> >
> > Alex
> >
> > On Mon, 18 Aug 2008 12:49:38 -0400
> > "Steven McCann" <[EMAIL PROTECTED]> wrote:
> >
> > > Hello all,
> > >
> > > Since hooked up a Trixbox system last year, we
have not
> yet gotten
> > > Caller
> > ID
> > > to work on most incoming calls. 80% of all calls
come up
> as 'unknown'
> > >
> > > I have tried to add some config that I saw in an
earlier email
> > > thread,
> > but
> > > it does not seem to be working:
> > > usecallerid=yes
> > > hidecallerid=no
> > > cidsignalling=bell
> > > callerid=asreceived
> > > sendcalleridafter=3
> > > cidstart=ring
> > > callwaiting=yes
> > > usecallingpres=yes
> > > callwaitingcallerid=yes
> > >
> > > I've also tried to change cidsignalling to =dtmf,
=dtmf,
> bell , but
> > this
> > > does not seem to make a difference.
> > >
> > > I know CID is there on most calls, because I could
> previously see it
> > > on a fax machine that was also hooked up to the
main POTS line.
> > >
> > > Any ideas?
> > >
> > > Thanks,
> > > Steven
> >
> >
> >
> >
> >
> >
> >
>
---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional
> > commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
