Title: Re: [Astlinux-users] How does AstShape work?
Hi,
I'd like to have some help regarding the use of astshape
 
I have 2 sites:
after check the bandwith I got the following values:
site 1
download  4 477 kb/s
upload 51 kb/s
 
site b
download 500kb/s
upload 100kb
 
do i put these value directly like this ?

EXTUP=4477

EXTDOWN=51

what about the tos value? is it something that I have to put in iax.conf ?

last question

do you advise to startup astshape script automatically ?

 

thanks for your replies,

 

jl

De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Kristian Kielhofner
Envoyé : lundi 23 janvier 2006 12:43
À : Discussion of AstLinux - Asterisk on Compact Flash
Objet : Re: [Astlinux-users] How does AstShape work?

Patrick Conroy wrote:
> Can anyone give me some insight into how AstShape is supposed to work? 
> I have never gotten it to work correctly, and I am sure that it is due
> to how I am setting it up.  On the box where I am currently testing
> AstShape, I am running AstLinux 0.3.0 on a Via EPIA mini-itx.  I run a
> speed test against my service provider's on-net test server and I  get a
> rate of 9176 kbps up and 9176 kbps down.  So, I set EXTUP to 8258 and
> EXTDOWN to 8258 and start astshape.  If I do another speed test (with
> nothing else running on this network connection), I get really slow
> speeds, and they seem to vary every time.  I have gotten speeds as low
> as 100 kbps.  Is this how it is supposed to work?  I figured I would see
> slow speeds if I tried to run the test while the connection is loaded
> with voice traffic, but with nothing else going on, shouldn't I get the
> same results as if AstShape isn't running?
>
> Thanks,
> Patrick
>

Patrick,

        Do you really need QoS with that much bandwidth?

        Anyways, getting back to AstShape.  Several things:

1)  Are you talking about kilobits or kilobytes?

1)  With a connection speed that high (and symmetrical) you can't
possibly be using cable or ADSL.  Where is your connection coming from?
  You might not need to set your EXTUP and EXTDOWN numbers so low.

3)  AstLinux sets up several queues with varying amounts of actual
bandwidth.  You can read AstShape and look at the output of "astshape
status" to see how it all works.

--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]



_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to