>This would imply that the define "CONFIG_PRODUCT_WANPIPE_TDM_VOICE" >is not set when wanpipe is build. > >This is definitely a Philip question... > >Lonnie
Maybe it is even more complicated: When you look at ftp://ftp.sangoma.com/linux/current_wanpipe/ChangeLog.3.4 you'll see that Dahdi 2.2 support was added in Version 3.4.5 (the latest is 3.4.6) - we are using 3.4.4. > >On Nov 15, 2009, at 3:35 PM, Tom Mazzotta wrote: > >> Lonnie, >> >> These tips helped me make a lot of progress. On the remote system >>with the TDM card, "dahdi show status" is recognizing the card. >>However, my local system with the Sangoma board is still a problem. >>My concern is the message "wanpipe1: Error: TDM VOICE prot not >>compiled" reported by dmesg (see below). Is it possible that there >>is some required component of wanpipe that was left out of the 0.7 >>build I am testing? >> >> pbx ~ # dmesg | grep wanpipe >> wanpipe1: Running post initialization... >> wanpipe1: Remora config done! >> wanpipe1: AFT Data Mux Bit Map: 0x01234567 >> wanpipe1: Front End Interface Ready 0x00000000 >> wanpipe1: Register EC interface wanec1 (usage 1, max ec chans 32)! >> wanpipe1: Configuring Device :wanpipe1 FrmVr=11 >> wanpipe1: Global MTU = 1500 >> wanpipe1: Global MRU = 1500 >> wanpipe1: Data Mux Map = 0x01234567 >> wanpipe1: Rx CRC Bytes = 0 >> wanpipe1: Global TDM Int = Disabled >> wanpipe1: Global TDM Ring = Disabled >> wanpipe1: TDMV HW DTMF/FAX = Enabled/Disabled(0) >> wanpipe1: TDMV Span = 1 : Enabled >> wanpipe1: RTP TAP = Disabled >> wanpipe1: Error: TDM VOICE prot not compiled >> wanpipe1: during installation process! >> wanpipe1: Shutting Down! >> wanpipe1: TASKQ Not Running > > wanpipe1: Unconfiguring FXS/FXO Front End... > > wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down) > > wanpipe1: Unregister interface from wanec1 (usage 1)! > > wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down) >> wanpipe1: Global Chip Shutdown Usage=1 >> wanpipe1: Unconfiguring FXS/FXO Front End... >> wanpipe1: Master shutting down >> af_wanpipe: Unregistering Wanpipe API Socket Module >> wanpipe: WANPIPE Modules Unloaded. >> pbx ~ # >> >> -----Original Message----- >> From: Lonnie Abelbeck [mailto:li...@lonnie.abelbeck.com] >> Sent: Sunday, November 15, 2009 2:51 PM >> To: AstLinux Users Mailing List >> Subject: Re: [Astlinux-users] Astlinux-0.7 Upgrade? >> >> Tom, >> >> DAHDI files should be located as /mnt/kd/dahdi/*.conf >> >> A reboot is required for DAHDI to see them. Also, after such >>files are created, they may be edited via the Edit tab. >> >> While this is painful, clearly DAHDI is the future, and the >>transition from ZAPTEL needs to occur. >> >> Lonnie > > >------------------------------------------------------------------------------ >Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day >trial. Simplify your report design, integration and deployment - and focus on >what you do best, core application coding. Discover what's new with >Crystal Reports now. http://p.sf.net/sfu/bobj-july >_______________________________________________ >Astlinux-users mailing list >Astlinux-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/astlinux-users > >Donations to support AstLinux are graciously accepted via PayPal to >pay...@krisk.org. Michael http://www.mksolutions.info ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.