The funny thing is that in linuxrc i've put this:
if ! mount -t ext2 /dev/mmc/blk0/disc /mnt/rootfs; then
if ! mount -t ext2 /dev/mmc/blk0/part1 /mnt/rootfs; then
if ! mount -t ext2 /dev/mmc/blk0/part2 /mnt/rootfs; then
echo "Root not mounted blah blah"
/bin/sh
fi
fi
fi
So any of these should be mounted, and still sometimes they're not
mounted. The only thing i've managed to get is a white screen with
vertical lines, nothing more.
Can be possible that the kernel i'm using has not the correct drivers?
Well, time for sleeping, it's 2:47am here :p
JeDi wrote:
On 1/5/06, Angel Sanchez Morales <[EMAIL PROTECTED]> wrote:
This is getting strange each time i try to boot this thing xD
I used x50v filesystem and at first it didn't boot (note that i'm trying
to mount the 3 devices at the same time, part1, part2 and disc), i
rebooted the pda and it then booted but it happened the same as before:
the screen faded into a white screen with vertial lines, this time were
pink and after 1 or 2 minutes they're turning black, like a bar code :/
After trying to format several times my sd card i only managed to get a
white screen with some vertical lines :(
JeDi, did you do anything special?
Which filesystem did you use?
It seems that for me the only filesystem that works is the x50v one.
I have the white or pink bars too sometimes. When that happens, I just
reset and try again. It never happened two times in a row though...
I'm just using all the x50v files that Fisherss uploaded the other
day. I modified the linuxrc inside the initrd to go along with my more
"standard" way of partitioning and formatting the sd card (using an
actual partition in stead of the disk itself), and that's it. OK, I
modified the kernel to have bigger fonts and a cute penguin on top of
the console :-) But it's working with the downloadable kernel too.
If you partition your sd card right, it has to be /dev/mmc/blk0/part1,
because that's the only device recognized, and the only partition on
the sd card.
I'm getting a bunch of error messages from the root filesystem trying
to boot, but opie starts anyway.
Good luck!
Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port