Well, it's 3:10 am here too, but I'm still trying a few things nonetheless :-)

Good night!


On 1/5/06, Angel Sanchez Morales <[EMAIL PROTECTED]> wrote:
> The funny thing is that in linuxrc i've put this:
>
> if ! mount -t ext2 /dev/mmc/blk0/disc /mnt/rootfs; then
> if ! mount -t ext2 /dev/mmc/blk0/part1 /mnt/rootfs; then
> if ! mount -t ext2 /dev/mmc/blk0/part2 /mnt/rootfs; then
>       echo "Root not mounted blah blah"
>       /bin/sh
> fi
> fi
> fi
>
> So any of these should be mounted, and still sometimes they're not
> mounted. The only thing i've managed to get is a white screen with
> vertical lines, nothing more.
> Can be possible that the kernel i'm using has not the correct drivers?
>
> Well, time for sleeping, it's 2:47am here :p
>
>
> JeDi wrote:
> > On 1/5/06, Angel Sanchez Morales <[EMAIL PROTECTED]> wrote:
> >
> >>This is getting strange each time i try to boot this thing xD
> >>I used x50v filesystem and at first it didn't boot (note that i'm trying
> >>to mount the 3 devices at the same time, part1, part2 and disc), i
> >>rebooted the pda and it then booted but it happened the same as before:
> >>the screen faded into a white screen with vertial lines, this time were
> >>pink and after 1 or 2 minutes they're turning black, like a bar code :/
> >>
> >>After trying to format several times my sd card i only managed to get a
> >>white screen with some vertical lines :(
> >>
> >>JeDi, did you do anything special?
> >>Which filesystem did you use?
> >>It seems that for me the only filesystem that works is the x50v one.
> >
> >
> > I have the white or pink bars too sometimes. When that happens, I just
> > reset and try again. It never happened two times in a row though...
> >
> > I'm just using all the x50v files that Fisherss uploaded the other
> > day. I modified the linuxrc inside the initrd to go along with my more
> > "standard" way of partitioning and formatting the sd card (using an
> > actual partition in stead of the disk itself), and that's it. OK, I
> > modified the kernel to have bigger fonts and a cute penguin on top of
> > the console :-) But it's working with the downloadable kernel too.
> > If you partition your sd card right, it has to be /dev/mmc/blk0/part1,
> > because that's the only device recognized, and the only partition on
> > the sd card.
> >
> > I'm getting a bunch of error messages from the root filesystem trying
> > to boot, but opie starts anyway.
> >
> > Good luck!
> >
> > Greetz,
> > JeDi
> --
> _______________________________________________
> Aximx50-port mailing list
> [email protected]
> https://www.handhelds.org/mailman/listinfo/aximx50-port
>
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to