You bet! Gerald
On Wed, Feb 15, 2017 at 1:54 PM, mzimmers <mzimm...@gmail.com> wrote: > Oh man...what a moron I am. > > I unplugged the USB device and put the card into the connector you > mentioned. Even without me holding down the boot button, it seems to be > loading (probably because it couldn't boot from the eMMC). I'm now getting > the 1-2-3-4-3-2-1 flashing of the LEDs...will report back when that's done. > > Thanks, Gerald. > > On Wednesday, February 15, 2017 at 12:50:55 PM UTC-7, Gerald wrote: >> >> The board is designed to boot off the SD card connector on the back of >> the board, not the USB port. >> >> Gerald >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/1dff17bb-187f-45d3-ae54-89f0fdc4b082%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/1dff17bb-187f-45d3-ae54-89f0fdc4b082%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ gcol...@emprodesign.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BdxC_Z4WvGhf41Qi-ONRMyF9Tn%3DqvpJdEftrj5z2bneRQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.