OK, so after some time, the LEDs stopped flashing. When the SD card is loaded, I can boot, and access the BBB via ssh, and all that good stuff.
When I remove the card, though, the BBB is acting the same way as before I flashed it. Robert: could this be because I inadvertently uncommented out that line in the wrong uEnv.txt file? And if so, how do I navigate to the file system on the eMMC so I can recomment that line? I'm still learning about devices and file systems on Linux. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/69e2b1c3-2857-4719-ae1e-5c6b2a27bd28%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.