oh ... this occurs with or without the camera selected using the middle mouse button navigation and/or zoom AND Auto Depth option Enabled.
With the Auto Depth disabled seems to work moving the view using the middle mouse nav with camera selected or not. Zooming with middle mouse or CNTL middle mouse push still has issues IF the camera is not selected. With camera selected and LCV on using G/R hotkeys in local or world works fine. Hmm it seems like using the 3D view AND clicking in 3D space with middle mouse as part of a view change leads to the jumps when back in the camera with LCV enabled. Just toggling "0" in and out has no effect... you have to change the 3D view to cause the jump in cam view with LCV enabled. Sorry I can not yet pin it down to something definite. The addition seems fine in probably most if the use cases. I do tend to find the outlier cases as I probably don't work in the same way most 3d artists do ^_^. Mike. On 11/05/14 13:07, Mike S wrote: > Only one problem I can see at the moment with this fine addition is > returning to locked camera view to adjust can snap your camera to the > last 3D viewport position rather than adjust the current camera position. > > 1. Set up the camera view you want with "lock Camera/view" (LCV) set. > 2. Turn off LCV as if you want to say adjust a light etc etc elsewhere > in the scene. Moving your 3D viewport to do the adjustments. > 3. Press "0" to get back into camera as you left it at 1. > 4. Turn on the LCV checkbox ...all is well so far. > 5. Attempt to adjust camera view , slight nudge zoom etc, and the camera > will snap to the last 3D view position you used to adjust your other > elements in. Thus you have to reposition again. > > > Mike. > > On 11/05/14 12:26, Mike S wrote: >> Seems to work fine with SCONS build on OSX against 36676. >> >> Mike. >> >> >> On 11/05/14 12:11, Campbell Barton wrote: >>> Can't see why linking would fail, did you apply the patch against >>> blender r36676? >>> >>> On Fri, May 13, 2011 at 9:46 PM, Damir >>> Prebeg<blend.fact...@gmail.com> wrote: >>>> Tried but I get linker error: >>>> LINK : fatal error LNK1181: cannot open input file >>>> '..\..\lib\Release\bf_editor_space_view3d.lib' >>>> >>>> On 13 May 2011 20:23, Campbell Barton<ideasma...@gmail.com> wrote: >>>>> Patch for camera view locking. >>>>> Access from View panel under the "Lock to Cursor" button, >>>>> >>>>> http://codereview.appspot.com/4528068/ >>>>> >> >> >> _______________________________________________ >> Bf-committers mailing list >> Bf-committers@blender.org >> http://lists.blender.org/mailman/listinfo/bf-committers >> > > _______________________________________________ Bf-committers mailing list Bf-committers@blender.org http://lists.blender.org/mailman/listinfo/bf-committers
