MLPPPoFR is a royal pain to find... Good stuff to know though! QoS config guide - http://grab.by/8u9e
http://www.cisco.com/en/US/customer/docs/ios/qos/configuration/guide/mlppp_over_fr_ps6441_TSD_Products_Configuration_Guide_Chapter.html On Thu, Jan 20, 2011 at 6:03 AM, Bojan Zivancevic <[email protected] > wrote: > One more dilemma on my side... > > When I try to enable multilink ppp over FR (virtual-templates blablabla) I > always get the message > > %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on Link Virtual-Access1 > Bundle Virtual-Access3 : > Frame Relay traffic shaping must be enabled > > I know I have read somewhere that this message should be ignored and that > in fact MLPPP works without it over FR. But now I can't find it. > > And I did not find a sure way to check if it is working or not. Can > somebody confirm FRTS must be applied or not, and it would be great if > someone could explain how to verify if MLPPP is really working (with or > without FRTS.) > > Best Regards, > > Bojan Zivancevic > Network Engineer > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
