I agree though... basic connectivity works without FTRS enabled. I would imagine that fragmenting and interleaving would not though.
On Thu, Jan 20, 2011 at 9:26 AM, Bojan Zivancevic <[email protected] > wrote: > Maybe exactly the fact it is in the QoS section means that FRTS has to be > enabled. :) > > > > And btw it is mentioned in the document, but not explained why. Bah. Cisco > doc often sucks on my opinion. > > > > Best Regards, > > > > Bojan Zivancevic > > Network Engineer > > ---- > > Comutel d.o.o. > > Omladinskih brigada 65v > > 11070 Belgrade > > SERBIA > > > > Tel: +381 11 217 8000 Ext.109 > > Mob: +381 64 646 8401 > > Fax: +381 11 6164641 > > > > http://www.comutel.co.rs > > > > *From:* Nicolas MICHEL [mailto:[email protected]] > *Sent:* Thursday, January 20, 2011 15:20 > *To:* Jay Taylor > *Cc:* Bojan Zivancevic; [email protected] > *Subject:* Re: [OSL | CCIE_RS] multink ppp over frame relay - is FRTS > mandatory? > > > > Cant beleive MLPPPoFR is on the QOS section ... I wouldnt have find it > without your help Jay ! > > > > > > Thanks > > > > > > > > 2011/1/20 Jay Taylor <[email protected]> > > MLPPPoFR is a royal pain to find... Good stuff to know though! QoS config > guide - http://grab.by/8u9e > > > http://www.cisco.com/en/US/customer/docs/ios/qos/configuration/guide/mlppp_over_fr_ps6441_TSD_Products_Configuration_Guide_Chapter.html > > > On Thu, Jan 20, 2011 at 6:03 AM, Bojan Zivancevic < > [email protected] > > wrote: > > > One more dilemma on my side... > > > > When I try to enable multilink ppp over FR (virtual-templates blablabla) > I > > always get the message > > > > %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on Link > Virtual-Access1 > > Bundle Virtual-Access3 : > > Frame Relay traffic shaping must be enabled > > > > I know I have read somewhere that this message should be ignored and that > > in fact MLPPP works without it over FR. But now I can't find it. > > > > And I did not find a sure way to check if it is working or not. Can > > somebody confirm FRTS must be applied or not, and it would be great if > > someone could explain how to verify if MLPPP is really working (with or > > without FRTS.) > > > > Best Regards, > > > > Bojan Zivancevic > > Network Engineer > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > > -- > Nicolas MICHEL > Ingenieur Réseaux et Securité (CCNA/CCNP) > > > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
