Cant beleive MLPPPoFR is on the QOS section ... I wouldnt have find it without your help Jay !
Thanks 2011/1/20 Jay Taylor <[email protected]> > MLPPPoFR is a royal pain to find... Good stuff to know though! QoS config > guide - http://grab.by/8u9e > > > http://www.cisco.com/en/US/customer/docs/ios/qos/configuration/guide/mlppp_over_fr_ps6441_TSD_Products_Configuration_Guide_Chapter.html > > > On Thu, Jan 20, 2011 at 6:03 AM, Bojan Zivancevic < > [email protected] > > wrote: > > > One more dilemma on my side... > > > > When I try to enable multilink ppp over FR (virtual-templates blablabla) > I > > always get the message > > > > %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on Link > Virtual-Access1 > > Bundle Virtual-Access3 : > > Frame Relay traffic shaping must be enabled > > > > I know I have read somewhere that this message should be ignored and that > > in fact MLPPP works without it over FR. But now I can't find it. > > > > And I did not find a sure way to check if it is working or not. Can > > somebody confirm FRTS must be applied or not, and it would be great if > > someone could explain how to verify if MLPPP is really working (with or > > without FRTS.) > > > > Best Regards, > > > > Bojan Zivancevic > > Network Engineer > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Nicolas MICHEL Ingenieur Réseaux et Securité (CCNA/CCNP) _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
