Try 2400 , I seem to recall a time when this happened to me and I had to recover my 3550 and the only baud that would work is the 2400; I cannot explain it, but I was able to recover my switch using that baud.
Best Regards, Joe Sanchez On 11/9/13, 12:22 PM, "Wilberth E. Lemaître" <[email protected]> wrote: >Hello Community, >I am having a strange issue with my Switch 3550. I updated the IOS and I >changed the Console BAUD to 115200 then I put it back to 9600 when the >upgrade was successful. I turned it on ago normally and now either 115200 >or 9600 speed is not working, I tried SecureCRT, putty, I changed the >console cable, everything. The weirdest thing is that when I set the >speed in 9600 in SecureCRT or putty, I can see while the switch boots up >which means the switch is working perfectly but when it says press RETURN > to get started I hit enter and nothing happens, absolutely nothing. I >broke out the boot process to delete the config.txt because sometimes >the speed console changes when you do an upgrade or whatever via the >console, but this time not even in switch: mode is letting me hit enter. >I know the switch is working properly because if I connect a cable to >f0/0 I can see the logging message on my screen when it comes up (this is >in 9600 speed in SecureCRT) Now, is there any other way t > o reset the BAUD of the console? Any other idea to get into the switch? >Or if this is a bug, how can it be solved? >Best regards,Wilberth >_______________________________________________ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com > >http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
